whitewolf_00
New Member
- Joined
- June 25, 2005
- Messages
- 2
- Reaction score
- 0
- City, State
- Auburn, Wa
- Year, Model & Trim Level
- 94 Ranger XLT,2.3L
Hi , I have a 94 ranger 2.3l 2x4. The original transmission was going bad. So I found a recommended shop and took the truck in. They replaced it . a couple days later I took it back and they put a second transmission in due to the first one being bad. (they got it from junk yard.
the second transmission had shifting problems. 3rd and 4th were very sloppy. I could shift up to third into the dash. and down to fourth to the seat. Long story short new mech looked at transmission and replaced some pieces up in the shifter area.They are saying the current shift knob (original) is too short. the tail peice needs to be longer. They just so happend to have a transmission they were rebuilding. and temporarily put the shifter in and it took care of the issues. They say it was from a 2003? I would like to know what it came from. the sticker on the side says F57A-AA.C675080. any idea's? I need to buy a after market shifter. no one carries one here.
the second transmission had shifting problems. 3rd and 4th were very sloppy. I could shift up to third into the dash. and down to fourth to the seat. Long story short new mech looked at transmission and replaced some pieces up in the shifter area.They are saying the current shift knob (original) is too short. the tail peice needs to be longer. They just so happend to have a transmission they were rebuilding. and temporarily put the shifter in and it took care of the issues. They say it was from a 2003? I would like to know what it came from. the sticker on the side says F57A-AA.C675080. any idea's? I need to buy a after market shifter. no one carries one here.