crafty_23456
Member
- Joined
- March 14, 2004
- Messages
- 44
- Reaction score
- 0
- City, State
- lacrosse, WI
- Year, Model & Trim Level
- 93 Explorer EB
I am planning on changing out my sector shaft seal today, but I have never removed a pitman arm before. My haynes manual just says to take out the cotter pin, remove the nut and attach the puller, but it says nothing about removing the cotter pin and nut where the arm attaches to the steering linkage. Do I leave that end of the pitman arm connected and just try and remove it from only the sector shaft?