New Idea For LED Signal Mirrors On Explorer

[intelisevil]

Are WHITE turn signal indicators legal?

Nice install.

Dan

 

[slick3d]

Thank you Sheepdogg, the resistors that I used where the, 39 Ohm Metal Oxide Film Resistors 5W, 5 Watts from Ebay.

http://www.ebay.com/itm/160655224373?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649

Hope this helps

 

[slick3d]

Thanks Dan, I'm not sure if white turn signals are legal, sorry.

 

[slick3d]

Hey ama4ace, I wish I could but it's not my line of work. I did my truck only because I did not trust anyone else to be as careful as I am and if I made a mistake I would only blame myself. It's really not that complicated, just take your time, follow the instructions from BigRondo,
the installation of signal mirrors,
http://www.explorerforum.com/forums/...d.php?t=293175
I have already done the hard work of determining what to use and you should be good.

Ebay,
resistors,
http://www.ebay.com/itm/160655224373?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649

led,
http://www.ebay.com/itm/390113432071?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649

led holder
http://www.ebay.com/itm/121041020503?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649

If you are not sure then I suggest getting someone who does this kind of work professionally.
Wish you the best,
Dennis

 

[ama4ace]

Hey ama4ace, I wish I could but it's not my line of work. I did my truck only because I did not trust anyone else to be as careful as I am and if I made a mistake I would only blame myself. It's really not that complicated, just take your time, follow the instructions from BigRondo,
the installation of signal mirrors,
http://www.explorerforum.com/forums/...d.php?t=293175
I have already done the hard work of determining what to use and you should be good.

Ebay,
resistors,
http://www.ebay.com/itm/160655224373?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649

led,
http://www.ebay.com/itm/390113432071?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649

led holder
http://www.ebay.com/itm/121041020503?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649

If you are not sure then I suggest getting someone who does this kind of work professionally.
Wish you the best,
Dennis

Hey Dennis thanks for posting the exact parts you used that for me was the hardest part. Now that I know what to get exactly I will
Be doing this in the spring. I will just try to get white LED's since all my lights have been converted to white. I shouldn't have a problem the instructions are neatly written and your pics help alot. I
appreciate it!

 

[slick3d]

Glad to be of help, good luck.
Dennis

 

[hondakillah]

Thank you for this. This page will be bookmarked for a future project.

 

[slick3d]

It works out really nice, just take your time.
You are welcome.

 

[Eric1249]

Thanks Dan, I'm not sure if white turn signals are legal, sorry.

Most likely yes. Just check with your state laws. The front and sides are typically amber to the front and sides and you should be ok.

 

[Nixthebomb]

Not sure about where you are from, But I do know that in Oklahoma it is illegal to have white, blue, or red flashing lights on a vehicle