TexasnativeDRJH
Member
- Joined
- February 14, 2011
- Messages
- 39
- Reaction score
- 0
- City, State
- Texas
- Year, Model & Trim Level
- 2000 XLT 4Door
I just replaced my vb gaskets and tcc solenoid and now I have no forward or reverse. I added 8 qts of mercon v and didn't have enought time to see if it was really full since the dipstick tube had residual oil in it.I have to try to fix it early tomorrow morning.
Any ideas what it could be? I used transmission assembly lube on the gaskets to hold them in place. Could a passageway be blocked off? Its supposed to dissolve when warmed up but it can't get too warm when its not driving the wheels.
Is the solenoid bracket supposed to hook into the groove on the cylinder shaped valve on the side? I think I have it in right but im not sure.
Any input would save me some gray hairs, thanks
Any ideas what it could be? I used transmission assembly lube on the gaskets to hold them in place. Could a passageway be blocked off? Its supposed to dissolve when warmed up but it can't get too warm when its not driving the wheels.
Is the solenoid bracket supposed to hook into the groove on the cylinder shaped valve on the side? I think I have it in right but im not sure.
Any input would save me some gray hairs, thanks