wwwylie
New Member
- Joined
- June 3, 2002
- Messages
- 7
- Reaction score
- 0
- City, State
- WI
- Year, Model & Trim Level
- '98 XLT
Looking for some clarification for testing a fuel pump. I have a 98 4.0 SOHC that doesn't want to start. The engine turns over fine, but no ignition. The fuel pump isn't kicking in. Checked the fuse, fuel pump relay and the PCM relay. All test fine. My question is, the relay connector does not see the couple seconds of power for the pump. What does that mean? I am thinking a bad PCM or connections to/from it. Any advice?
I have the Haynes manual, but it doesn't go into what the test means.
I am obviously hoping it isn't the fuel pump.
I am selling the truck just because of its age (166k) so now it is acting up. I also had to replace a leaky oil pan. The truck is stuck out side and it is about zero so I want to do my homework before doing the actual work. :exp:
I have the Haynes manual, but it doesn't go into what the test means.
I am obviously hoping it isn't the fuel pump.
I am selling the truck just because of its age (166k) so now it is acting up. I also had to replace a leaky oil pan. The truck is stuck out side and it is about zero so I want to do my homework before doing the actual work. :exp: