Rancho 2.5 lift leaf's on 95+

[NoBoundaries]

I was thinking about this and I would like to get some thoughts. From my understanding, Rancho makes a 2.5 inch lift for 1991-1994 Explorers. Would it be possible to put the rear leaf's from this package on a 95+ Explorer with the torsion lift in the front? Can these leaf packages be purchased without purchasing the whole lift kit? Will 1991-1994 leaf's work on a 95+ and will it be too much lift for the torsion lift? Thanks for the input ahead of time! Dead Link Removed

------------------
Tim Y.
1996 Explorer XLT
4.0L OHV 4x4

 

[SteveVB]

Tim,

The Rancho kit doesnt come with the complete springs just two add a leaves for the rear, Part numbers 320 and 321, plus hardware kits for them 8060 for 3/8 center bolt, and 8363 for a 7/16 center bolt. You may be able to order them from someone, but I dont know for sure. As far as fitting the later models I dont know, but I think someone on the site has done it. I got about 3" but my springs are old and may have sagged. Someone else will have to answer whether they will work with the torsion lift.

Good Luck,

------------------
Steve VB
91 Navajo
2 1/2" Rancho,
31" Goodyear AT/S