bigjoncoop
Member
- Joined
- January 1, 2023
- Messages
- 34
- Reaction score
- 10
- City, State
- Melbourne
- Year, Model & Trim Level
- 07 Explorer XLT V6, Ironm
Hey guys so I've been pulling my hair out trying to figure this out!
Installed aftermarket radio and Factory amplifier / subwoofer started popping. So I did the usual and installed a 12 volt to 5 volt voltage regulator on the remote turn on wire. Still did not help, so I installed a delay on timer set to 10sec and it's still popping when the radio turns on or off!!!
I've also tried to install a capacitor & resistor RC filter... but unfortunately nothing has helped!
Has anybody else ran into this issue?
Installed aftermarket radio and Factory amplifier / subwoofer started popping. So I did the usual and installed a 12 volt to 5 volt voltage regulator on the remote turn on wire. Still did not help, so I installed a delay on timer set to 10sec and it's still popping when the radio turns on or off!!!
I've also tried to install a capacitor & resistor RC filter... but unfortunately nothing has helped!
Has anybody else ran into this issue?