Highlifted
Member
- Joined
- June 22, 2010
- Messages
- 36
- Reaction score
- 0
- City, State
- Eastfreedom Pa
- Year, Model & Trim Level
- 93 Mazda Navajo XLT
I have a lift kit with the two holes in the pivot brackets.. but mine is a 6"-8" skyjacker kit I think). My radius arm drop brackets also have "Skyjacker" written on them, that might provide a clue for you about which kit you have. My parts also came from a Ranger that was being scrapped. lol
The pics of your components look identical to the parts I have.
I use 6" springs and a FA600 pitman arm.. the steering links are nicely parallel and level, and it drives virtually like stock (no bump steer or twitchy stuff).
For the sway bar end links, I just cut my factory steel ones and found some pipe that the ends fit in, welded them up, and used pins with R-keys. I also cross drilled the pipe where the link ends were exposed in the holes and welded there for added strength.
Front brake lines... you can get longer super-duty Ford truck lines (I forget what years) and do that, but for a while I ran a mod that relocated the body side of the line/fitting lower a few inches. It was a bugger to re-craft the steel line to fit, but it worked great.
If you would like pics of any of this stuff, let me know I'd be glad to help.
could i see some pics? also what did u do for the rear SOA?