VCOSH28
Active Member
- Joined
- February 16, 2014
- Messages
- 77
- Reaction score
- 3
- City, State
- Waterloo, WI
- Year, Model & Trim Level
- 99 and 98 Explorer EB
Hey guys. From the research I've done on the site both the trucks have the 5r55e transmission. Both 4.0 4x4. The 98 didn't have reverse so I put the 99 into it. Thought it would be plug and play (or drive) but it won't go into gear. I did take the torque converter from the 98 trans because it had been remanufactured. Was that a mistake? Would having too much fluid cause it to not shift at all? Fuses were checked. I'll keep searching the site for info but if anyone has any thoughts/suggestions please offer them.