abrilsdad
New Member
- Joined
- December 26, 2014
- Messages
- 8
- Reaction score
- 1
- City, State
- HUNTSVILLE, TN
- Year, Model & Trim Level
- 92 explorer Sport 4.0
I have a problem with turn signal on driver side.
The rear stays on steady when activating and the front light doesn't come on. The passenger side works just fine as well as the hazards on both sides.
I have put all new bulbs. I even tried a new turn signal switch still the same.
With a test light on the rear socket its bright but on the front socket it is dim.
A wire diagram would help as well as knowing where the wires are routed
also if anyone just knows what the fix is.
The rear stays on steady when activating and the front light doesn't come on. The passenger side works just fine as well as the hazards on both sides.
I have put all new bulbs. I even tried a new turn signal switch still the same.
With a test light on the rear socket its bright but on the front socket it is dim.
A wire diagram would help as well as knowing where the wires are routed
also if anyone just knows what the fix is.