Upgrade to discs, proportioning valve

[Mike Draper]

I've got a '94 with an 8.8 trac-lock with drum brakes, I've located an axle from a '95 with correct gearing and an open carrier that I'll be installing an Aussie locker in. My question is concerning the proportioning valve differences between drums and disc brakes, the E-brake cable and brake line. What parts do I need to grab from the donor vehicle to make the swap? I know I've seen this covered somewhere, but can't find the info...

Thanks
mike

 

[jd4242]

http://www.explorerforum.com/forums/showthread.php?t=303701
You need the rear,all brake lines to the frame and ebrake cable up to where it come out the cab.you also need a mc from a 95 without cruise and without a proportioning valve.you said your getting it out a 95 so you may be able to use the mc if it doesnt have cruise or proportioning valve.everything is a direct swap! World of difference! !!

 

[Mike Draper]

Thanks!! Appreciate the info! I guess I'll grab everything and sort it out as I go..