windscreen washers stopped working.....

[wetdog]

....does anyone have a fuse number, location, or if the fuse is shared by something else?

its defo a fuse or rely, as there is no noise from the pump. yes there is fluid in the bottle, and no the lines are not blocked or frozen. neither are the jets. disconnected the lines and blew back through. the pump is inert!!! and i dont have any test equipment or handbook to trace the fuse myself.

i thank you.

mick.

 

[JDraper]

Location of the relays is below the air intake mounted inside the passenger's side frame rail. There are two in there.

Check this thread for info on the relays in the box. http://www.explorerforum.com/forums/showthread.php?t=147998&highlight=washer

 

[Howard]

The fuse is in the aux fuse box (side of dash with door open) can't remember which one but do know it is an 8 amp (brown). Should be only one blown. Happened to me when system was frozen.

 

[wetdog]

thank you very much gentlemen.

mick

 

[JDraper]

Location of the relays is below the air intake mounted inside the passenger's side frame rail. There are two in there.

Check this thread for info on the relays in the box. http://www.explorerforum.com/forums/showthread.php?t=147998&highlight=washer

Whoops, since you're in GB, I forgot and did it from the US side. On our vehicles, it's inside the RIGHT frame rail.

 

[wetdog]

Whoops, since you're in GB, I forgot and did it from the US side. On our vehicles, it's inside the RIGHT frame rail.

i'd worked it out mate.

thank you,
mick.

 

[wetdog]

The fuse is in the aux fuse box (side of dash with door open) can't remember which one but do know it is an 8 amp (brown). Should be only one blown. Happened to me when system was frozen.

cheers howard, this made it much easier to locate. it was the fuse, all fine now.

thank you guy's,
mick.