Blacksheep Josh
Slinky+Escalator=Fun
- Joined
- July 31, 2006
- Messages
- 3,659
- Reaction score
- 15
- City, State
- Statesboro, GA
- Year, Model & Trim Level
- '01 Ford Ranger, RIP 93 X
As some of you may know, I replaced my balljoints back in January/February and had many many many problems. The balljoints I used then were from eBay, which is why I think they've all ready failed, or maybe not even failed just not the right size...
Anyways, this go around I'm going to buy (or rather my Grandparents are sponsoring this) the Duralast brand balljoints from Autozone. Going to go ahead and replace all uppers and lowers and this time with some professional help.
Is there anything I shoudl replace while I'm into it? I've all ready replaced the outer tie rod ends, so I think I'm good with that.
Only thing left to do is switch the steering gear...
Anyways, this go around I'm going to buy (or rather my Grandparents are sponsoring this) the Duralast brand balljoints from Autozone. Going to go ahead and replace all uppers and lowers and this time with some professional help.
Is there anything I shoudl replace while I'm into it? I've all ready replaced the outer tie rod ends, so I think I'm good with that.
Only thing left to do is switch the steering gear...