rb142
Well-Known Member
- Joined
- May 22, 2013
- Messages
- 681
- Reaction score
- 9
- City, State
- Detroit, MI
- Year, Model & Trim Level
- 2001 Ranger XLT 4X4
No BFH needed for that bolt. That will probably just make things worse. Pop the brake lines out of the plastic clip holding them so that they will flex a little. Then you can work the old bolt out around them. After reading the stories on this site I was expecting a huge fight, but it didn't take me more than a couple minutes to get out. The new one is easier to put in because the cam washer isn't welded to the bolt so you have more flexibility.