replace

Hi, this is my first thread. I have an 03 Explorer with factory amp/sub and am looking to upgrade them. I want to be able to feel the bass without shaking all the cars around me. I am happy with the factory front and rear speakers, so I only want to upgrade the sub and amp. My current head...

I'm planning on replacing all of my interior lights with led panel lights, but i dont know how to get into the trunk light. Please help?

Hey, I need some help please! I need some definate procedures for replacing the motor mounts on a '99 Mountaineer, 5.0, AWD. In studying the situation, the upper nuts are easily accessed by removing the mud/rain guard flaps from the fenderwells. But I still gotta figure out the best way to...

So I just found out by our mechanic that the Transmission Torque Converter is bad, and needs to be replaced. Would I be better off replacing the whole transmission? Or just the torque converter. We have our own mechanic we go to, so no way am I going to the dealer, and I could always buy the...

I started on replacing my filthy seat belts, and wanted to give a "how-to". Difficulty scale from 1-10: 2. This is a VERY easy and simple project that makes a huge difference to you and your passenger as you put the seat belts on for each drive you take. Here are two of the belts side by...

If you have been following some of my threads, I have been replacing and cleaning my interior of my newly purchased 99' XLT. Here is my carpet replacement thread: http://www.explorerforum.com/forums/showthread.php?t=272522 I then found and replaced the floor mats...

Okay so my problem is the light behind the meters is..well not there. Im guessing they are bulbs that have burnt out. Here is a pic for reference... This is a 99 explorer xlt btw. Couple Questions... 1: Is this hard to replace by myself?( I have some mechanical skills I would be able to pull...

Hello once again. I am going to be replacing my seat belts, and I need some advice. How do you replace the belts and mechanisms? Is there a way to snake them out of the hole(s) of the plastic trim, or is the trim supposed to be replaced with the belt and mechanism as a whole? I have...

Hey guys, I've got an '02 Ex 4x4, and like alot of other guys with the '02's, both my rear springs are broken in multiple spots. I'm getting set to replace the rear springs as well as all 4 shocks. I've done some searching on the forum and have come up short with suggestions on what springs to...

ok...you know the intake tube that connects the throttle body to the Mass Airflow Sensor??? well...can you replace that with a steel tube even though it has the oil breather hooked up to it??

The glass on the driver's side fog light (located in the front bumper) on my 05 Eddie Bauer Explorer was shattered. I believe I have to replace the entire unit. Does anyone know how to replace it? I took a quick look and I didn't see any access. Thank you very much.

Hey, I was hauling a giant log off a trail and I bent my rear (stock) bumper up. Should I fix it and reinforce it or replace it with a fabricated one? Heres a pic...

1994 Ranger 4.0 4x4 My clutch blew after only two years this time and I think it was the slave (there is fluid everywhere). So now I am going to replace the whole clutch kit by myself, never having tried with Haynes Manual. Any suggestions from those who have done this (best way to drop the...

I love cars... but I hate working on them. It's not even so much that I don't like working on them it's that I don't know what I'm doing and I'm clumsy and oafy and just not good at working in tight spots. That being said... I work for a living and cant' afford to always send my truck to...

Fender benders suck. Im trying to replace the front bumper on my own but it would be great if i could get some help. Can anyone give me instructions, or tips, or websites where i could find instructions would be great. instruction pics would be awesome too. Sorry if this has been posted by...

Brushes and brush hood. Brushes this short are prone to sticking and causing fluctuating guages, not just volt/amp guages. temp, oil, press. And Intermitant no starts.