timing chain

Had shop replace water pump, timing chain, vvts, and all the rest. 5k. Took them 3x in a period of 2.5 wks to get it to run right. But alas, it's not. Before I could FOT at any point, regardless of speed etc and it would just get up n go. Now it blows codes misfire 4.5.6. There 5...

New here, but not new to Fords and wrenching on them. My son has an '06 Eddie Bauer with the 4.0. 174K miles. He bought it with a brand new transmission in it, and the motor seemingly ran well. After a while, he said it was rattling a lot. Doh. (Didn't listen to me when he bought it about...

Long story, so yesterday I decided it's time to replace my timing chain tensioners before they get worse, I also had a very small leak from my oil pan. So we pulled the old tensioners out, drained the oil, replaced the oil pan gasket, got the oil pan on nice and tight. Put in new tensioners...

Hello! I have a 2005 Ford Explorer XLT 4.0 with 4x4. It only has 94k miles, but I suppose that doesn't make it immune to time. The easiest way to describe it is that it sounds like a tractor or a TDI diesel. The ticking is pretty regular once warmed up. It runs absolutely fine, with no...

So I am new to the forum and also having issues locating the pcm in a 2014 ford explorer sport, while doing the timing chain replacement, anyone know where or how to get to it thank you in advance

I haven't posted in a while. I have a 2004 EB 2WD Explorer with a 4.6L engine. I love it, but it's getting a lot of miles and has some issues. I'm in Upstate NY, but the truck is from GA, so no rust. Anyway, I was driving about a month ago and noticed some unhappy lifter noise. I looked at...

Suddenly our Explorer started making a terrible racket which was indicative of timing chain rattle. It was constant and did not alter with engine temperature. Sounded awful. Shop took a look and confirmed and so we were all set for them to pull the engine and replace front and rear components...

I don't normally search for help on internet threads, but I'm getting dangerously close to scrapping this project. I recently replaced the timing chain cassette and tensioner on my 4.0 SOHC with 150,000 miles. I bought Ford's OTC 6488 for the timing, and it ran great for about 4 hours. As soon...

hello all, I have always been able to find solutions on existing threads, so if this is is covered please redirect me. 03 sport trac 4.0 Sohc I had a timing chain rattle on start up so I replaced the left and right tensioners. I primed them before installing them. I drove home from the...

I'm looking for an opinion on whether or not it's worth it to have one or all timing chains replaced on my 2007 Explorer 4.0 with 186k miles. Truck is in very good shape for it's age and mileage, and no indicators of tranny problems or anything else major. But I began hearing the typical...

I’ve replaced both timing chain tensioners and have done an oil change with full synthetic high mileage oil. I am planning on replacing belt tensioner and idler pulley. What could this noise be? There are 158k miles and she runs mint. The noise happens at operating temperature and is not very...

I have a RWD, 2001 ford explorer sport, with the 4.0 SOHC engine, that has about 195k miles on what I assume is the original trans and engine. I inherited the truck from my late mother. I have put the last 15-20k miles on it with minor issues but now I have a nice clear rattle at cold start from...

All right, I know this sounds a bit dramatic but my poor girl is gonna have to be sold if I can't find someone. I live in Western Maryland, somewhere around the Cumberland area. Does anybody perhaps live nearby and know of a mechanic or shop who is able to fix my broken timing chain guides and...

All right, so a long while ago my timing chain guides decided it was time to stop existing. My explorer still rattles down the road if I need to go somewhere, and very soon I'll be getting it fixed, so I have a few questions. One, where can I find the reinforced metal timing chain guides? I'd...

Hi my name is Miranda I have an 03 Ford ranger 2.3 does anyone no how difficult replacing timing chain is

have a 03 sport trac xlt. Made another post that was said to be the timing chains going out. I'm getting a new engine instead of getting it fixed. But I always asked if it was the timing chains going out. Wouldn't the noise always be loud , and always making a noise? I'm asking because some...

Well, the timing chains in my v6 flex fuel SOHC finally broke, or slipped, after 210,000 miles. Either way, the engine's done for. I'm having a shop install an engine from a junkyard, or possibly even a Jasper reman engine, if I can find the money. What cars would have an engine that would fit...

Hello. People, help me please. I have engine ford explorer 4.0 ohv 1991 year Need to buy timing chain kit I found this: DNJ TK422 - for 1st gen explorer (1991) CLOYES 94172SA -for 2nd gen explorer (1995-...) Is it same? Can I install CLOYES 94172SA (from 2nd gen explorer) to my engine?

I am replacing the drivers side timing chain tensioner and am having some trouble priming it, would somebody care to explain how you can prime it quickly the right way? :dunno: :feedback: :help:

I just removed my engine from my 2002 Explorer Sport Trac. After taking the flex plate off I took the engine compartment seal off and half of the jackshaft Bolt came falling out and the other half is still screwed in. I have no idea what to do because if I try to drill it out then I will ruin...

Took my 2000 Ford explorer in to have a new tranny put in and they said my timing chain was making a loud noise ..I've been going to the same mechanic for over 20 years so I trust him to a point ..but not sure on this since I haven't heard this before it went in the shop..he says he doesn't work...

I've got a 06 Ford Explorer 4.6 with the tow package that has around 133k on it. I bought the vehicle a couple of weeks ago and have no idea of its history. My question is would it be good medicine to replace the timing chain, timing guides, and tensioners while I do all the regular maintenance...

So basically had chain slap for a week or so. Was told that it was a timing chain guide or tensioner that was most likely the cause of the problem. Was told that it was cost around 1400.00 or so to repair. Well I didn't have that kind of cash, so I decided I would take it upon myself to try and...

Hi, I'm new here but I've got a 98' Ford Explorer Sport with the V6 SOHC engine and one of the back timing chains has gone bad and I'll have to pull the engine either way. So, I was hoping for some guidance as far as whether I should replace the timing chains or just replace the engine; and if I...

Hello, I finally finished the project last night of replacing all the timing chains, guides, and tensioners on my 2001 explorer sport, 4.0l sohc, 4wd. Tried starting it and it just made this deep noise while it did crank and spun, but no start... Anyone, any ideas of where I should check...