96 XLT V8: Tripmeter/Odometer Fails, Speedo OK | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

96 XLT V8: Tripmeter/Odometer Fails, Speedo OK

YamahaRick

Well-Known Member
Joined
August 7, 2001
Messages
113
Reaction score
0
City, State
Metro ATL, Georgia USA
Year, Model & Trim Level
1996 XLT 5.0
To get trip/odometer working 100% once again, what should be done?

While I'm at it, are there any attractive alternative speedo/tach/etc. faceplates I should consider?

Current odometer reading is 217K; probably close to 5K short right now.
 



Join the Elite Explorers for $20 each year.
Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





There's a small plastic worm gear that deteriorates
from heat and breaks. A company called odometergear
sells a replacement gear to fix it. Cost is about $25-30
if I remember correctly.

They have a website with instructions on how to
replace the gear.
 






Or grab a junkyard unit, easier to swap if you don't want to do the gear...

Could grab a 2001+ Sport whiteface cluster...
 






They have a website with instructions on how to replace the gear.

Wow, the procedure is easier than I anticipated.

Thanks for the link. I plan to order a new worm gear and get it installed soon.
 






You're welcome and good luck with it.
 






I replaced to worm gear no fixy. I replaced instrument cluster no fixy.
Speedo is fine but no odo. Is there a sensor on the tranny?
 






Did you put your new worm gear into replacement instrument cluster?

Good luck, and drive safe.
 






Here is the service manual. For a 97, but should be the same (96 not as detailed). VSS I believe is on the transfer case. There may be two VSS if you have 4x4.
The odo uses the speedo signal, so that is weird.

1673201118672.png

1673201149096.png

1673201189274.png
 






Back
Top