Dismiss Notice



Register Today It's free! This box will disappear once registered!

Highest end oil Filter available

Discussion in 'Member Recommended Aftermarket and OEM Parts' started by Dono, September 7, 2018.

  • Searches ExplorerForum.com
    1. Dono

      Dono V8 Limited turbo and retired SC 4.0 OHV Elite Explorer

      Joined:
      February 18, 2009
      Messages:
      4,945
      Likes Received:
      250
      Trophy Points:
      103
      City, State:
      Winnipeg, Manitoba
      Year, Model & Trim Level:
      00 Limited V8
      | K and P Engineering

      For us 5.0 V8 guys, the filter is an S17
      The bad? This product carries a price that will bring a tear to your eye when your paying for it.

      The Good?
      1. I can't find one negative review.
      2. Over on the YellowBullet the big guys use them, and swear by them.
      3. High flow, and rated at a consistent 35 micron filtering.
      4. Re-usable filter media (Better be for that price).
      5. Here's the big one for me: The filter media comes apart easily and can be checked for engine bits (specifically bearing material) Cutting up filters is time consuming for me and usually ends up in a blood sacrifice.

      I'll be ordering one, and will post further reviews once I get it, and then again once my motor is back together and actually using it. Hopefully after the engine dyno I will be able to post pics of a real world, personal experience
       
      • Like Like x 1
    2. Support EF

      Join the Elite Explorers for $20

      Explorer Forum has probably saved you that much already, and will continue to save you money as you learn how to diagnose fix problems yourself, and learn which modifications work without having to experiment on your own. Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments in all forums, and Media Gallery, create more private Conversations, and more. Join Today. Your support is greatly appreciated.


      to hide adverts.
    3. vroomzoomboom

      vroomzoomboom Elite Canuck STOCK SUCKS! Elite Explorer

      Joined:
      January 22, 2007
      Messages:
      9,062
      Likes Received:
      425
      Trophy Points:
      103
      City, State:
      selkirk, manitoba
      Year, Model & Trim Level:
      98 supercharged 347 sport
      one thing i have been thinking about don, is using a remote oil filter adaptor. this way you can place the filter anywhere you like, some offer the use of duel filters, you can also use a larger filter like a fl1a and it also will allow you to ditch the explorer adaptor that we all know over time will leak and cause a nice little mess.
       
      • Like Like x 1
    4. Dono

      Dono V8 Limited turbo and retired SC 4.0 OHV Elite Explorer

      Joined:
      February 18, 2009
      Messages:
      4,945
      Likes Received:
      250
      Trophy Points:
      103
      City, State:
      Winnipeg, Manitoba
      Year, Model & Trim Level:
      00 Limited V8
      I've thought a lot about that. I just don't trust my ability to remote mount safely. With motor movement, etc. I still have the issue of cutting filters open for the first while to look for thrust bearing material. For the next while, I think this is the safest solution for me.

      If I ever get my motor issues sorted out, I think I would love to take on a remote mount system as a separate project.
       
    5. RangerX

      RangerX Elite Ranger Staff Member Moderator Elite Explorer

      Joined:
      July 14, 1999
      Messages:
      9,422
      Likes Received:
      115
      Trophy Points:
      83
      City, State:
      Omao, Kauai
      Year, Model & Trim Level:
      '93 Ranger XLT 4X4
      How much?
      I opened the link, but didn't want to dig all through it to find the cost...
       
    6. Albino 94LTD

      Albino 94LTD Recovering from Moab 2016 Elite Explorer

      Joined:
      June 24, 2003
      Messages:
      3,812
      Media:
      1
      Likes Received:
      41
      Trophy Points:
      68
      City, State:
      Newcastle Wa
      Year, Model & Trim Level:
      White 94 Limited
      Callsign:
      KG7PKQ
      Why don't you send the oil in for analysis instead of simple visual inspection?
       
    7. Dono

      Dono V8 Limited turbo and retired SC 4.0 OHV Elite Explorer

      Joined:
      February 18, 2009
      Messages:
      4,945
      Likes Received:
      250
      Trophy Points:
      103
      City, State:
      Winnipeg, Manitoba
      Year, Model & Trim Level:
      00 Limited V8
      There isn't time for that. When a thrust bearing goes, it goes fast.
      A few weeks could easily mean a block ruined.

      I'm really at that spot where I'll need to check thrust wear with a gauge and material in the oil filter daily for starters, and extend from there. its been an extremely expensive road. I don't want to trash crank, pistons, etc. again. if I can catch a wearing thrust early, I'll save a significant amount of money. hopefully, I'll find there is no issue next round,
      :
       
      Last edited: September 8, 2018
      • Like Like x 1
    8. domct203

      domct203 Elite Explorer

      Joined:
      October 11, 2017
      Messages:
      135
      Media:
      66
      Albums:
      1
      Likes Received:
      35
      Trophy Points:
      28
      City, State:
      CT
      Year, Model & Trim Level:
      2002 Explorer XLS
      Between $164-$233, depending on finish.

      Hard Pass ......

      I can’t seem to find the S17 for sale anywhere but the K&P website. Not even Amazon has it.
       
      • Like Like x 1
    9. Centaurus5.0

      Centaurus5.0 Elite Explorer

      Joined:
      April 15, 2016
      Messages:
      957
      Media:
      17
      Albums:
      1
      Likes Received:
      255
      Trophy Points:
      103
      Year, Model & Trim Level:
      1996 5.0L 2wd
      Dang Dono, feeling bad for you.

      There are tens of thousands of boosted small blocks running around on the streets that never have that thrust problem.

      Unrelated question: What kind of oil do you use?
       
    10. Dono

      Dono V8 Limited turbo and retired SC 4.0 OHV Elite Explorer

      Joined:
      February 18, 2009
      Messages:
      4,945
      Likes Received:
      250
      Trophy Points:
      103
      City, State:
      Winnipeg, Manitoba
      Year, Model & Trim Level:
      00 Limited V8
      I'm pretty sure I have the thrust issue taken care of.
      The ATF cooler line was definitely restricted, and that's fixed. Just in case the TC was an issue, that's replaced, High volume oil pump going in, and that will help keep the thrust oiled also (Help with the added oil requirements with the turbo oiling). This oil filter advertises a very large flow rate thru it, so that should help. The issue was definitely mechanical and no oil would have helped.
      My old motor always had low oil pressure. I had moved up to a 10-40 weight oil to help oil pressure. I don't think I'll need the heavier weight now. That will be up to the engine builder to tell me. I used Joe Gibbs straight 30 for break in, and then moved to a non-synthetic with zddp in it. Unfortunately, nothing could protect the motor from the rear thrust pressures, or the cam from too light of spring pressures.
       
    11. CDW6212R

      CDW6212R Hauls the mail. Elite Explorer

      Joined:
      June 17, 2004
      Messages:
      18,012
      Media:
      3
      Albums:
      1
      Likes Received:
      668
      Trophy Points:
      143
      City, State:
      Knoxville, TN
      Year, Model & Trim Level:
      98 Limited AWD
      There is an oil filer adapter from FMS that is similar to ours, it's just a 90* block adapter that an FL1A might work well in the Explorer. I got one to try, but plan to put it on my Mercury(back up vehicle) later.

      A remote filter adapter is not hard to install, if the front bumper is removed. I mounted on on the passenger side for my trans, it was simple with three bolts, and protected behind the frame horn. I plan to mount the same kind on both sides of my trucks, and have two filters for the oil.

      Note that normal filters for Fords clean to about 15 microns, 35 microns would be bad, that's a bunch of small particles getting through in the 15-35 micron size. The bypass filter I'll use from Amsoil, those clean to 2-3 microns, cleaner than new oil is.

      BTW, there was an old spin on filter sized like the FL1A, that you can take apart easily and check, clean. I have one somewhere, the car I used it in made a mess to remove the filter, and I didn't put it back on. I think it was about $80 back in the 1980's. That would be great for frequent monitoring of condition for a new engine, the thrust bearing material etc. I think mine is in a box of parts in my spare room. I might run across it in the next month, I'll look.
       
    12. Dono

      Dono V8 Limited turbo and retired SC 4.0 OHV Elite Explorer

      Joined:
      February 18, 2009
      Messages:
      4,945
      Likes Received:
      250
      Trophy Points:
      103
      City, State:
      Winnipeg, Manitoba
      Year, Model & Trim Level:
      00 Limited V8
      I'd love to go with an a amsoil dual bypass system and add one of the above filters as the first oil filter. Huge cash, though.

      The 15 micron is really debatable on the Ford filters. The lower the micron rating, the lower flow the filter (unless they go in to bypass right away). It's a trade off. High flow, and a consistent particle size (the paper filters do let large particles thru).

      Reading at the yellowbullet on the engine builders that use these filters, but dont advertize they do tells me a lot about the filters.
       
    13. CDW6212R

      CDW6212R Hauls the mail. Elite Explorer

      Joined:
      June 17, 2004
      Messages:
      18,012
      Media:
      3
      Albums:
      1
      Likes Received:
      668
      Trophy Points:
      143
      City, State:
      Knoxville, TN
      Year, Model & Trim Level:
      98 Limited AWD
      System 1 oil filter, it just came to me, is the filter I have someplace. Look at that on Summit, the new version they sell runs over $200, and they also say 35 microns. Mine is the original style, just like the small picture at the top of the search page. I'd say those would be comparable to that new brand this thread is about.
       
      • Thanks Thanks x 1
    14. gmanpaint

      gmanpaint Torsion Bar Free Staff Member Moderator Elite Explorer

      Joined:
      August 1, 2008
      Messages:
      9,340
      Likes Received:
      509
      Trophy Points:
      133
      City, State:
      STL MO
      Year, Model & Trim Level:
      94 XLT-95 FX4
      I bought a new Mobile 1 brand, M1-210A for $15. I thought that was high. Lol

      It is rated at 30 microns, for high capacity flow, with a steel center tube. Anti drain back valve to stop filter drain for engine starts.

      Sounded pretty decent for the costs.

      Big chief ran this when he was eating bearings left & right. No idea how much it is.

       
      Last edited: September 13, 2018
    15. Dono

      Dono V8 Limited turbo and retired SC 4.0 OHV Elite Explorer

      Joined:
      February 18, 2009
      Messages:
      4,945
      Likes Received:
      250
      Trophy Points:
      103
      City, State:
      Winnipeg, Manitoba
      Year, Model & Trim Level:
      00 Limited V8
      For me, the real feature is being able to look at whats inside the filter without taking 15 minutes cutting it apart.
      Not to mention the blood.
      It looks like a crime scene when I'm done.
      That's the real selling point for me. I doubt I'd spend the cash on it otherwise.
       
      • Like Like x 1
    16. roscoe 0202

      roscoe 0202 Elite Explorer

      Joined:
      February 3, 2014
      Messages:
      269
      Likes Received:
      46
      Trophy Points:
      38
      City, State:
      salt lake city utah
      Year, Model & Trim Level:
      1999 explorer sport
      I don't know if they still make them but Oberg was the filter of choice foe nascar in the 60's and 70's when I quit following
      roscoe
       
      • Like Like x 1
    17. CDW6212R

      CDW6212R Hauls the mail. Elite Explorer

      Joined:
      June 17, 2004
      Messages:
      18,012
      Media:
      3
      Albums:
      1
      Likes Received:
      668
      Trophy Points:
      143
      City, State:
      Knoxville, TN
      Year, Model & Trim Level:
      98 Limited AWD
      Good memory, and I have one of those also. That was a two piece sandwich type, with a flat square filter screen. Before they came up with the idea, I took mine to a machine shop and had another piece made, a center section. What I had made used two filters, the center was for the inlet, and I ran the oil out the two original sides, doubling the oil flow.

      I used that Oberg filter I put together, once, and the threads in my center section were not machined very well. It leaked a bit from the threads, and I decided not to rebuild it then. I never got back to that either, I meant to fix it, and a short while later Oberg made a version similar to what I did.
       
    18. Dono

      Dono V8 Limited turbo and retired SC 4.0 OHV Elite Explorer

      Joined:
      February 18, 2009
      Messages:
      4,945
      Likes Received:
      250
      Trophy Points:
      103
      City, State:
      Winnipeg, Manitoba
      Year, Model & Trim Level:
      00 Limited V8
      I will say this is a quality made product.

      oil filter2.jpg

      oil filter1.jpg

      oil filter 3.jpg
       
      • Like Like x 3
    19. gmanpaint

      gmanpaint Torsion Bar Free Staff Member Moderator Elite Explorer

      Joined:
      August 1, 2008
      Messages:
      9,340
      Likes Received:
      509
      Trophy Points:
      133
      City, State:
      STL MO
      Year, Model & Trim Level:
      94 XLT-95 FX4
      That's really nice looking! Looking forward to the review.
       

    Share This Page







    We Support Our Troops!