01 explorer sport loss of power | Ford Explorer Forums

  • Register Today It's free!

01 explorer sport loss of power

elward1790

New Member
Joined
April 28, 2023
Messages
9
Reaction score
1
City, State
Newland nc
Year, Model & Trim Level
2001 Ford explorer sport
So im having issues which i thought was a mass air flow sensor but its gone way past that now. Its chugging really bad and has no power. Sometimes when i try to take off from a dead start it wont go foward for a second. After that it catches and accelerates but its only does that every now and then. So far i have put a new mfs and air filter, pcv valve, O2 sensors all four, all new vacuum lines, and last night i put on new upper and lower manifold gaskets and throttle body gasket. When i first cranked it i thought it was fixed. I got it in and drove it to town with awesome acceleration, no hesitation or anything. Until it got warm. Now it seems worse. I dont know what to do. Im a very capable mechanic but theres a few things that im not experienced in (technical data readings) but mostly i know my way around but i am lost. And i checked the cats too and they are good. Please help
 



Join the Elite Explorers for $20 each year or try it out for $5 a month.

Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.











Have codes scanned and report back please.
So the codes that were popping up was 171 and 174 and occasionally a misfire cylinder 2 code. But since ive changed the intake manifold gaskets it’s only showing the misfire on cylinder 2. But i know its not the wire bc I switched it with a brand new one off my other explorer and its still popping up. Mew spark plugs by the way
 












Would that cause the severe chugging
 






Rubber PCV elbow checked?
Very important to insect the bottom side of the elbow where fuel vapor contaminants collect.
 






My sports having this same issue, I've done all that as well except the gaskets so far, Let me know if you find out your issue
 






Yup and a new pcv valve as well
 






Yup and a new pcv valve as well
So i just took a picture of my O2 sensors sitting at idle and this is what i got
0EAD6578-BFA3-4DA4-9269-73AB392FDC1F.jpeg
 












So the first picture is when i first started my truck. Everything looks ok (except bank 2 sensor 2). The second picture is after it warmed up and started missing and sputtering. If anyone knows the reason for this please help

DD2E76D8-C408-4F6F-B9A6-DC03BD8EFC07.jpeg


AD37D36A-1958-4F41-BCD8-F872734E85E5.png
 


















Back
Top