Search results

Been a while since I've been active on here, Acquired a 94 xlt 2wd with 169K miles 1 owner prior to me with forward slipping/gone for pretty cheap, Have been looking for a transmission for a reasonable price but everyone wants an arm and a leg for a used a4ld, Debating on selling it and have it...

Well my 91 navajo with a 93 4.0 Non Egr Motor with around 105K Miles and Pre 88 BII Trans are not doing well , My trans is okay minus the leak , The motor is ticking a good amount when cold , and since my Trans Doe's not have OD it's seeing around 2800-3000 Rpm at around 55-60 mph , and when I...

Now That I Work at Tires Plus Total Car Care , I can Get an Employee Discount on Tires , labor , parts etc , They have a Set Of the Primewell Valera HT 31-10.50-15"s in Stock , They Retail for around $99.99 each new , Thinking about going with them since there pretty good priced with a 50K Mile...

Well As some know I put a Bronco II Trans In my 91 Navajo and Cannot Find the Tcc Wiring info , I know that I have a 3 Wire Plug from my Pcm And The B II Trans only has a 2 Wire Plug , I Just need to figure out the wiring for the Tcc and I should be Good to go , I have Driveshafts and Fluid to...

I Did not notice the Difference in the Shift linkage between my Current Bad 91-94 Explorer linkage And the Bronco II shift Linkage , Is there An Easy way to Change the Linkage ? , Also I noticed that the Bronco II trans Has a Different Bell housing , it has 2 Less bolt Locations than the 4.0...

My a4ld Lost all Forward Gears , A4ld Guys Chime in Please !! Well as some people know on here I put a Used Trans in my 91 Myself , I Had a Slight leak from the Get go , Always kept an eye on Fluids and the past few days have Read fine on the Dipstick , but Started to Hesitate to Go into...

Well Here Are A Few Pics From When I Got It , And Beside My Navajo ! Yes That's A 1953 Ford F-100 In The Background , That's My Restoration Project to My Dad-Rip Pops !

Found This Online a Few Minutes ago , Never heard of a D50 TTB ! , Is It Real Or Just A D44 With a 50 Casting number on the Bottom ?? http://atlanta.craigslist.org/nat/pts/3045226930.html

As The Title Suggests , I have an 89 Thunderbird Super Coupe 3.8 ohv v6 And M5R2 5 Speed Trans And The Bottom End of Motor Is Blown , It Was Running before something Gave Out And Blew Up , Was Wondering If I Could Bolt My 4.0 OHV Motor To That Trans ? Thanks In Advance Everybody !

Well I Have A Camber issue Ive Been Dealing With Since purchase In late 2003 , Before The Lift Coils I Had / That Camber , After Coils Now of Course Its Different . But My Main Question Is , Does My passenger Side Radius Arm Look Off , Where It Actually Mounts The Arm Itself Has Looked That...

Well i Found A deal on Craigslist For A 93 Explorer Auto With a Bad Torque Converter , Its lifted With he said a 5" Suspension Lift , I Think 4" Or 5.5" , He Also States It Has a 4" Body lift , I can tell by pics its a 3" BL , Has 33" Maxxis tires Has 143K Miles all original , 3 owners total ...

I Have A Rancho Steering Stabilizer That I Bought From A Buddy of Mine On Here Brian A Long Time Ago , Wondering If Anybody has Any Input On Where to Mount It and the Easiest way to Get It Mounted , Ive Never Installed one but i have Removed and Replaced them on my old K5-El-Camino Hybrid , I...

Found This ! 31 spline 8.8 rear axle mini spool On Craigslist , Here's the link -http://atlanta.craigslist.org/eat/pts/2803291561.html--

Well As You Can Read In My sig , i have a 3" body lift , and 2.5" skyjacker coils and shocks up front , i'm thinking of taking the body lift and the 2.5" off and doing Only suspension lift , maybe even a sas down the road , just checking on peoples opinions on the 4"-5.5" 6" And Custom...

Alright guys tried to replace my busted trans with a used trans and im running into problems , i have it completely bolted it and Double checked , Now I start the truck check the fluid its full and good to go , i go to shift gears and nothing ! so i thought first off i didnt slide the trans...

Drove it home 60 miles with nothing major happened , it had a shutter while in drive or in park when i bought it for cheap , knowing it didnt run right , thinking i could fix it easily , well i decided to change plugs that helped the sutter and shake some , then changed the oil with mobil super...

was wondering if a 2000 model radiator will fit in my first gen , i found an all aluminum one on craigslist for a decent price and it looks nice and in good shape , and feedback will be nice , i searched but didnt find enough info to be sure , thanks in advance Bruce

does anybody know the right wires to wire in an aftermarket Sunpro 10.000 Rpm Tach , ive searched and havent found much , maybe im looking in the wrong place , if you could help any that would be great , Thaks bruce

Will a jeep wrangler Warn differentail guard for a Dana 35 . bolt onto a 1991 ford ttb dana 35 or rear dana 35 ? , i found one cheap and would like to know as soon as possible , i used the search on here and i tried google but i couldnt find concrete evidence saying it would fit , thanks Bruce

Bruce Hulsey Griffin -GA 1991 Mazda Navajo , Bought it when i was 16 for $900 first i removed the faded window tint , then Blew the motor up after 3 Months of owning it , replaced that , 2 weeks after the new motor , the Trans broke the main shaft , Threw in a New Trans , then a 3"...

ok so i was reving my motor up one day ,after i put a new muffler and turn down on it , and boom my truck jumped out of park and started to move , since then i just used my E brake , is there anything i should worry about ??

Im Lookin To Buy Some Performance Parts For My Rig If You Have Any Links That Would Help Me Out Alot Thanx In Advance Bruce