Search results

Does anyone know if the tie rod ends from a 80-96 f150/bronco would bolt directly into the knuckles of a explorer? I saw a steering setup I’d like to try and was wondering if anyone had tried this idea.

Can someone with a stock height 4x4 explorer with no camber issues measure the distance from the driver side tie rod mount (on the knuckle) to the passenger side tie rod mount (on the knuckle).

This is just a thread to help me get started in the right direction. I have read the rule book but I was wondering what mods some of you would do to enter a Explorer into the stock class EMC. Things that would make it more reliable and help a Explorer finish the race. I am considering trying to...

Looking for a used super runner steering kit. If you have one, please PM me. Let's work something out.

WTB superlift superrunner steering system.

I was coming home from my latest wheeling trip. I was traveling about 65 mph when I noticed a smell of smoke. I initially thought I forgot to unlock my hubs, but after thinking about it, I remembered unlocking them as I aired up my tires. I began seeing smoke come into the cab of the truck...

I took the explorer in to have it SMOG tested today. I was nervous because the last time I took it in, it barely passed. That was two years ago. Since then I rebuilt the top end and have done a lot of preventative maintenance. The one thing I was worried about, that I haven't touched since I...

With in the last two years, I have replaced: shocks, outer u-joints on the axle shafts (full c-clip upgrade), wheel bearings/races, ball joints, tie rods, cleaned and re-greased the manual hubs 4 months ago, replaced one front rotor (drivers side), new brake pads with AR clips and new slide...

I need to know if a manual transfer case out of an 88 bronco II will fit in a 1991 Ford Explorer I am at a pick n pull now and would like to pull it please help ASAP!!!!!

I will be pulling the powertrax locker out of my dana 35 (1st Gen TTB axle) shortly. It has no issues, I am upgrading to lower gears and a selectable locker. Looking for $200 OBO.

I got in my ex the other day and was adjusting my seating position in my seat. As soon as I put pressure on the upright seat position (seat back) it gave way. Clack, clack, clack, clack! Now the seat won't adjust to any position other than laying back. The wife says I can get some junkyard seats...

Was looking around for a set of upgraded axleshafts for the 8.8 and stumbbled across these. Does anyone know if these would work in the Ex 8.8? http://compare.ebay.com/like/130748076344?_lwgsi=y&ltyp=AllFixedPriceItemTypes&var=sbar

Is there anyone in the central California area, or hell, anywhere in California that has a manual shift transfer case they are selling/getting rid of that I can have or buy for a reasonable price?

I'm in the process of doing the e/c clip eliminator and have a question about removing it. I already have a powertrax locker installed do I need to remove the locker in order to remove the e/c clip?

How do I change the title of the link in my signature from what you see down below v, to something like My 91 XLT registery?

So, I have spent the last four hours looking threads asking people about what shocks to run or for opinions on certain shocks. I thought, what a great idea to be able to look in one place for that information. I realized I had not seen a thread which allowed people to post what shocks they're...

I've heard of people clearancing the radius arm in order to have easy access to remove the vertical bolt on the dside of the third member. I have the James Duff LA's and was wandering if I grinded a notch into the radius arm, would this weaken the arm at all or enough to cause any worry of...

Those of you who have moved your axle forward by adding washers or extending the threaded part of the heim, did you moved the upper coil buckets one inch forward as well making the lower coil mount in line with the upper coil mounts?

I used a ujoint press to press out the ujoints and once I was done I inspected everything. I found two spots on each ear of the axle shafts, near the machined area of where the ujoint goes. The machined area was not affected. Anybody see any issues using these axles? Here is a pic of what Im...

Does anyone have a part number, size or know what store would carry these snap rings? The full circle snap rings for the snap ring upgrade. I can't seem to find them in town.

Does anybody know if a diff cover or diff guard from a jeep Dana 35 will fit on a TTB Dana 35?

Anybody have any leads on where to find the cheapest spicer 5-760x ujoint right now? Ebay has them for $26 right now. I checked Rockauto and they dont sell spicer parts on their site. Any help would be appreciated.

Looking to buy 5.13's for the Dana 35 TTB axle. So if you know somebody, who knows somebody, who knows somebodies cousins uncles brother and they have some 5.13's for the Dana 35 TTB axle can you have them contact me through the forum. I would appreciate it.

I bought a dana 44 from a guy I know who was going to use it for a swap and ended up getting a dana 60. He had no need for the 44 at this point and hooked me up with a great deal. He, however, did not know exactly what year wagoneer it came out of. Does anybody on here know how to identify this...

My clutch is beginning to slip and I want to replace it before the wheeling season gets underway in my neck of the woods. Any recommedations as to which clutch I should use or stay away from? I checked centerforce and apparently they do not make a clutch for the explorer/ranger/BII.