15x10, 32's, 4in. lift, 1st gen

[pughman]

you all think the 15x10 rims with the 4in. backspacing and the 32in. bfg a/t's , will fit with the 2in bl , and the 2in. springs and Shackles?




--------------------------------------------------------------------------



Size:15x10
Backspacing:4"

4 brand new BFG All Terrain KO tires 32x11.50 15

Warrior Products Lift Shackles 91-Up Ford Explorer, 1-1/4in Rear

Skyjacker Softride Lift Coil Springs Amount of Lift Front 2.0 in

2" BODY LIFT

 

[AlanGoering]

I run those wheels with a 35" on a 98 XLT, and with 4 inches combined lift I think you should be able to clear 31's with a bit of flex and possibly a 32 with some rub while wheelin, but thats truck dependant of course. With 4 inches on a 2nd gen we can get 33x12.5's most of the time easy...

 

[FROADER]

They will fit, but since they are wide wheels with that back spacing you'll probably rub on either the radius arms or sway bar while turning.

 

[pughman]

whats the stock rim backspace one more time ?

 

[FROADER]

4.5

Why are you going so wide with the wheels for a 11.5 tire?

 

[pughman]

annnn , i think i like the FAT look , its a 2wd anyways , looks are my goal.....


this guy here has Rancho 2" suspension lift ,32x11.50 BFG'S on 15x8 American Racing Wheels and this is what it looks like.

http://www.cardomain.com/ride/386817/1

looks tall to me ?


i might go the 15x8 , but that deep dish look is so sweet..

 

[FROADER]

That's defenitely higher that 2".

Granted this is a 4x4 but this is a 4" with 33s. 15x8 wheels.

 

[pughman]

ya ..i did not think that guy had any clue what he was talking about ! but i'll have 4in. any ways..

think you could have went 15x10's ?

 

[FROADER]

yes I could have but i don't like that look. I also had 3.75 backspacing on those wheels. the wider the wheel the more likely it will rub when turning.

 

[pughman]

your truck there looks hot ! i might just go the 8's , but i just thought i'd ask...

 

[slravene]

go with the 8, you wont be disappointed.