Jason24
New Member
- Joined
- February 22, 2014
- Messages
- 1
- Reaction score
- 0
- Year, Model & Trim Level
- 2000 Ford Explorer
Hey everybody new to the site.
I have a 2000 ford explorer 4.0 sohc had a rough idle and then loss of power. Then would not stay running but for few minutes then would die on me. Replaced maf, iac valve, tps sensor,fuel filter. Then checked the fuel pressure at the fuel rail and got 65 psi and it held at 65 psi after it ran for awhile and stalled out on me. now it wont start at all just cranks. pulled codes po442, p1131,p1151,p0171,p0174. I know what all the codes are for but at a loss for where to start with these codes. sorry it is so long but wanted give as much info as I could been working on this thing all day and ready to drag it to the back forty and put it out of its misery!!!
Any suggestions would be appreciated
I have a 2000 ford explorer 4.0 sohc had a rough idle and then loss of power. Then would not stay running but for few minutes then would die on me. Replaced maf, iac valve, tps sensor,fuel filter. Then checked the fuel pressure at the fuel rail and got 65 psi and it held at 65 psi after it ran for awhile and stalled out on me. now it wont start at all just cranks. pulled codes po442, p1131,p1151,p0171,p0174. I know what all the codes are for but at a loss for where to start with these codes. sorry it is so long but wanted give as much info as I could been working on this thing all day and ready to drag it to the back forty and put it out of its misery!!!
Any suggestions would be appreciated