RayoVac
Well-Known Member
- Joined
- July 16, 2002
- Messages
- 124
- Reaction score
- 48
- City, State
- Northern, IN
- Year, Model & Trim Level
- 2020 Explorer ST
I think all the items on my list are in those three modules. I did some estimation of the shifts in the memory addresses for the other items based upon the shift in the memory address in the BCM from 2019 address to the one in the 2020 ST you found for the LED rear turns. I am going to try and do some further investigation this weekend.
I was trying to do the same thing, with the Binary. What is throwing me is I think I found the Front Bulb detection and if I am correct its in 726-40-02. For MY16-19 Front was in 726-27-01 and the rear was in 726-27-02. Again if I found the front (and I think I have)... the Front would be in 726-40-02 and the rear is in 726-44-02. That seems like more than just a shift.
So just to be clear if you end up looking...
Front bulb detection (I think):
726-40-02 : xxxx x*xx xx (change hex from 0 to 1)
Rear bulb detection:
726-44-02 : x*xx xxxx xx (change hex from 1 to 0)
I think another potential easy one to find would be Bambi mode as its an easy test. Given for MY16-19 it was also in 726-27-01, which is where front bulb detection was... I played with a bunch of bits in 726-40-02 with that logic. I failed to find anything. I don't want to poke around blind to much as we know there are some write once settings in the BCM, I would hate to hit one of those with a value that screws something up and then not be able to change it back without a visit to a dealer. Luckily I have made good friends with my Local Ford dealer and I know they will use IDS to fix one of those if I happen to hit one, but it's the hassle of doing it and I still have to pay shop time for it.