Carbon87
Active Member
- Joined
- December 28, 2019
- Messages
- 84
- Reaction score
- 19
- Year, Model & Trim Level
- 2020 Explorer XLT
100% sure. What I did was take a snapshot of the as-built. Then I changed the option in the basic configuration screen. Then I went back and took another snapshot of the as-built. That was the only flag modified. Whether there are more variables is primarily why I think it needs more evaluation. But I can guarantee it was the only change, and it went from a 2 to a 0 on my vehicle. (The rest of mine is 0029 0C04 80YY).
Ignore the addresses on the left; not sure why the program does that. But here is the comparison, and the only modification was changing that variable.
I have NOT confirmed that it works yet. blwnsmoke seems to think it stuck, but I won't be able to validate until tomorrow.
EDIT: If you wan't to confirm, you can do the same procedure where you save the as-built data, change it in the basic menu, then save the changed as-built data and see what changed. It can be put back right away if you don't want to leave it with it being unknown right now...
Ignore the addresses on the left; not sure why the program does that. But here is the comparison, and the only modification was changing that variable.
I have NOT confirmed that it works yet. blwnsmoke seems to think it stuck, but I won't be able to validate until tomorrow.
EDIT: If you wan't to confirm, you can do the same procedure where you save the as-built data, change it in the basic menu, then save the changed as-built data and see what changed. It can be put back right away if you don't want to leave it with it being unknown right now...