21 FPIU civilian style center console?

[Exploere313]

View attachment 438033View attachment 438034View attachment 438035View attachment 438036View attachment 438037

Where can I get this

 

[Rick]

Where can I get this

I would ask @Levittown Ford Parts Benny may be able to help you out.

 

[Exploere313]

I would ask @Levittown Ford Parts Benny may be able to help you out.

Ok thank you

 

[shadow9317]

Original remark was translated

Peter

I have the part numbers

 

[shadow9317]

View attachment 438033View attachment 438034View attachment 438035View attachment 438036View attachment 438037

Hi, where did you put the radio receiver when installing this console ? Did you relocate it ?

 

[peterk9]

Hi, where did you put the radio receiver when installing this console ? Did you relocate it ?

The member you quoted was last seen here on April 18, 2023, so you may not get a reply.

Peter

 

[shadow9317]

The member you quoted was last seen here on April 18, 2023, so you may not get a reply.

Peter

lol, ok thanks.

 

[Myrdhyn]

@peterk9 and @shadow9317 Look at alexc's photos one more time. It looks like he fabricated this himself, or had someone do it for him.
His top piece appears to be a civilian model with a plug in the shifter location. And the location where you would mount the rear climate controls is a blank instead of the standard part with a plug insert.

Based on his photos, it appears he shortened the tray in the front to make it fit without moving the receiver. If you look at the real Admin Console there is this extension bit. And that is what causes the placement issues.

 

[shadow9317]

@peterk9 and @shadow9317 Look at alexc's photos one more time. It looks like he fabricated this himself, or had someone do it for him.
His top piece appears to be a civilian model with a plug in the shifter location. And the location where you would mount the rear climate controls is a blank instead of the standard part with a plug insert.

Based on his photos, it appears he shortened the tray in the front to make it fit without moving the receiver. If you look at the real Admin Console there is this extension bit. And that is what causes the placement issues. View attachment 453901

I have this one too, it’s basically the executive package for the Police Utility Interceptor. Ford sells that top panel. I believe I posted the part number somewhere in the beginning of this forum.

 

[Myrdhyn]

I have this one too, it’s basically the executive package for the Police Utility Interceptor. Ford sells that top panel. I believe I posted the part number somewhere in the beginning of this forum.

I have the part number from you and I called Ford to get the newer one.
The point I'm trying to make is the top unit is different on his compared to the REAL Admin Console..
Left is alexc's right is Dfab's

 

[shadow9317]

I have the part number from you and I called Ford to get the newer one.
The point I'm trying to make is the top unit is different on his compared to the REAL Admin Console..
Left is alexc's right is Dfab's View attachment 453902

Yes I see, on this one he used the civilian top. That cap I believe he got from the internet somewhere, or someone 3d printed it. I remember seeing the round caps for sale somewhere online, but didn’t go with it.

 

[Myrdhyn]

Yes I see, on this one he used the civilian top. That cap I believe he got from the internet somewhere, or someone 3d printed it. I remember seeing the round caps for sale somewhere online, but didn’t go with it.

Its not just the cap though. Again, look at the part where it meets with the dash. Its differently shaped. Because he shortened the tray the AMU does not need to be moved.

 

[shadow9317]

Its not just the cap though. Again, look at the part where it meets with the dash. Its differently shaped. Because he shortened the tray the AMU does not need to be moved.

Yes , I know the part , I actually have one of those too, on my spare civilian console. I see what your talking about now,

 

[shadow9317]

I have the part number from you and I called Ford to get the newer one.
The point I'm trying to make is the top unit is different on his compared to the REAL Admin Console..
Left is alexc's right is Dfab's View attachment 453902

Here is another angle of an old pic of that set up.

 

[Myrdhyn]

Here is another angle of an old pic of that set up.

View attachment 453903

Exactly, its looks like a civilian modified console. He likely took it to a shop and had them make it fit.

Talking about admin consoles.. Salvage FPIU with one installed. https://www.copart.com/lot/54388924/salvage-2023-ford-explorer-police-interceptor-il-chicago-north

I'm willing to bet that the reason units with the admin console come with SYNC3 is because they have the APIM in the front and the AMU in the back like the civilian model.

 

[shadow9317]

Exactly, its looks like a civilian modified console. He likely took it to a shop and had them make it fit.

Talking about admin consoles.. Salvage FPIU with one installed. https://www.copart.com/lot/54388924/salvage-2023-ford-explorer-police-interceptor-il-chicago-north

I'm willing to bet that the reason units with the admin console come with SYNC3 is because they have the APIM in the front and the AMU in the back like the civilian model.

Yes that’s correct. I ordered most of the stuff to complete the project. The gps and antenna cable can be moved to the back along with the radio. It looks like the speaker wire harness will have to be extended to the rear. The sync 3 models have a screen that is connected to the APIM , instead of the radio receiver like the existing one. It’s taking time , but I will eventually get it figured out. I’m gonna start out with the 8” screen , just to verify that it does work.

 

[peterk9]

Unfortunately, we may never know what Alekc did. He was last seen here on April 18, 2023.

Peter

 

[shadow9317]

Unfortunately, we may never know what Alekc did. He was last seen here on April 18, 2023.

Peter

We need 1 person who relocated the radio to the back, and 1 person that successfully upgraded to Sync 3 with the 8” screen lol . I might have to be the first, if I find some time.

 

[FordPoliceMan]

As the owner of Nenno Products, we don't pay anyone to advertise for us and never have. Our products speak for themselves.

overpriced junk 256$ FOR A NON FACTORY LOOKING CONSOLE you must be smoking some crack, I could literally get the OEM console for that price... tack on an extra 100$ you can get the metal plate and the console together for 356$! like bruv XD yall make me laugh nenno

 

[Myrdhyn]

We need 1 person who relocated the radio to the back, and 1 person that successfully upgraded to Sync 3 with the 8” screen lol . I might have to be the first, if I find some time.

There is a mod kit for it now. Was posted to a facebook group I'm a part of.
They offer 2 versions, one that locates the radio under the passenger seat, and the other that locates it in the rear where it should be.

SYNC 3 Upgrade for 2020-2024 Ford Police Interceptor Utility

< Go back to catalog Exclusive Best-Seller SYNC 3 Upgrade for 2020-2024 Ford Police Interceptor Utility Add SYNC 3, Apple CarPlay, and so much more to your 2020-2024 FPIU. ★ The wait is over. As…

interceptorinnovations.wordpress.com