35's with pics

[ozzyfan319]

i got the 35s on with only the body lift and shackles. here are some pics...

Front end

drivers side

passenger side

sidewall

Stockers, phhh...

this is my 4 year old next to the new meat lol!!!

 

[CougarX]

Looks great! Now you just have to go wheelin a few times to see what rubs and trim some more! You could always grab some glass fenders too since one is "bruised and scared" already

 

[CougarX]

Oh yeah. Do you have any close up pics of what you trimmed at the back of the fenders? I've got an extra set of 35s and I think I may be doin the same thing to my 98 sometime since it is now my beater.

 

[ozzyfan319]

i dont but all i did was start at the bottom about an inch back and start to arc it in about 8 inches up. then i turned the wheel and used a grinder to do the finishing touches . go for it it'll look great on a sport trac!

 

[kert0307]

looks good. Why is there a chain hanging from under you ex?

 

[CougarX]

i dont but all i did was start at the bottom about an inch back and start to arc it in about 8 inches up. then i turned the wheel and used a grinder to do the finishing touches . go for it it'll look great on a sport trac!

The Trac already has 35s, but its suspension lift with a TT and shackles and trimmed and it still rubs sometimes, need to trim some more

I've got an extra set of 35s that were on the trac when I bought it. I may body lift my 98 4-door and do the same as you. I wasn't sure how it would look and thought I would have to trim too much, but now I know! And I like it!

 

[ozzyfan319]

go for it i like the look. i already took her out on the trail and they dont rub enough to warrant more cutting seeing that itll be on the road about 80% of the time. those tires are great for just about everything.

the chains are steps i made. i welded them across the bottom so there is a stable surface, but left the side links loose so they dont take away any clearance.

that was after a little ice cold ingenuity

 

[kert0307]

the chains are steps i made. i welded them across the bottom so there is a stable surface, but left the side links loose so they dont take away any clearance.

that was after a little ice cold ingenuity

lmao.......Nice idea though.

 

[CougarX]

It was in the tips section of a 'Fourwheeler' magazine a couple month back.

 

[UtahX]

Looking very nice.

 

[buckshotmudder]

I saw that article in the Fourwheeler magazine... Looks good- keep it up

 

[ozzyfan319]

the only ones i ever saw was a grate held up by two cables that didnt seem to swing very well. i saw that in peterson's so we came up with this.

thank you every body for the compliments!

 

[moose1]

Are those stock rims??? just my .02 its looks crappy, the tires look to big for the truck, but props on fitting them