99 EXPLORER OVER HEAD CONSOLE SOCKET BULBS

[zorronj]

Hello

I'm looking for the Over head console socket bulbs, the brand name that I have on mine is STANLEY but I couldn't find it even a generic one
thanks in advance for any reply

 

[donalds]

Map Light Bulb Part

I had to replace the overhead console on my 2000 XLT. The replacement console does not have light bulbs. When trying to buy new bulbs, I found out that there are small parts that the actual light bulbs fit into. There is one for each bulb. I am not sure what the part is called and cannot...

www.explorerforum.com

 

[zorronj]

EXPLORER 99 MAP SENSOR WIRES PART NUMBER PLEASE

 

[Turdle]

EXPLORER 99 MAP SENSOR WIRES PART NUMBER PLEASE

No such thing

 

[zorronj]

I'm talking about this harness wires on the top of the engine that I have with electrical tape

 

[zorronj]

View attachment 430632

I'm talking about this harness wires on the top of the engine that I have with electrical tape

 

[DemonMudder]

View attachment 430632

Was there supposed to be a caption with the image?

The map light bulbs are 194s, easy and cheap

 

[DemonMudder]

I'm talking about this harness wires on the top of the engine that I have with electrical tape

What exactly is wrong with it? Broken connector, wires exposed?

 

[zorronj]

What exactly is wrong with it? Broken connector, wires exposed?

Wires exposed that's why I put some electrical tape

 

[DemonMudder]

If its just that section of the wiring, then you can just cut that section out, solder in some new wiring with heat shrink over it, that should be fine. Or you can go to a junkyard nab a pigtail, wiring as far back as needed, cut and put that new one on with solder and heat shrink. Either should work fine as long as that's the only spot of issue on the wires.

 

[zorronj]

If its just that section of the wiring, then you can just cut that section out, solder in some new wiring with heat shrink over it, that should be fine. Or you can go to a junkyard nab a pigtail, wiring as far back as needed, cut and put that new one on with solder and heat shrink. Either should work fine as long as that's the only spot of issue on the wires.

it's a big area that's why I want to replace it the whole harness

 

[DemonMudder]

As said, can cut as much wiring as needed from the junkyard harness. But I'm not sure you'll find that new, let alone do I know the exact name or # for that one. Just my two cents, but junkyard would be quick, easy, and cheap; long as that wiring looks fine, should be okay, just follow yours and cut where it's safe, then copy that for one on a junked X, so that you can directly replace it

 

[donalds]

That knock sensor harness plug is part of the main engine harness you will have to replace the whole engine harness if you wanna just replace that 1 connector cut and splice imo

If its just on the knock sensor side then pull the intake and replace it

More Information for BOSCH 0261231314

 

[DemonMudder]

That knock sensor harness plug is part of the main engine harness you will have to replace the whole engine harness if you wanna just replace that 1 connector cut and splice imo

If its just on the knock sensor side then pull the intake and replace it

More Information for BOSCH 0261231314

And as always, you've got the links to parts, not as long of a harness as I thought it may be

 

[zorronj]

That knock sensor harness plug is part of the main engine harness you will have to replace the whole engine harness if you wanna just replace that 1 connector cut and splice imo

If its just on the knock sensor side then pull the intake and replace it

More Information for BOSCH 0261231314

Thank you, I ordered and waiting to receive it cut it solder with heat shrink tubes