CarFreak146
Well-Known Member
- Joined
- February 3, 2003
- Messages
- 797
- Reaction score
- 0
- City, State
- Shawnee, Kansas
- Year, Model & Trim Level
- '94 Explorer XLT
Neutral Safety & Reverse Switch Question
I've got a B&M MegaShifter that I'm puttin in the Explorer to shift my newly installed C4, and there's a neutral safety switch and a reverse light switch on the shifter. now, my question is..... what do I needa do to get these switches to work....
I'm assuming I just needa run a 12V source to the Neutral Safety Switch?
And I've gotta find the reverse light wire and run to the Reverse Light Switch??
Please help me figure this out, b/c the Instructions with the shifter isn't detailed about this step.
--Ryan
I've got a B&M MegaShifter that I'm puttin in the Explorer to shift my newly installed C4, and there's a neutral safety switch and a reverse light switch on the shifter. now, my question is..... what do I needa do to get these switches to work....
I'm assuming I just needa run a 12V source to the Neutral Safety Switch?
And I've gotta find the reverse light wire and run to the Reverse Light Switch??
Please help me figure this out, b/c the Instructions with the shifter isn't detailed about this step.
--Ryan