Another OHV M90 build

[Dono]

Do not use the gaskets that come with the headers phix. Use the silver gaskets that are for the stock manifolds. If you use the header gaskets, they will dry up, and crack off. Instant exhaust leak. I learned the hard way.

And no issue on asking rather than paging thru 80 pages. This thread goes on forever.

 

[jd4242]

Do not use the gaskets that come with the headers phix. Use the silver gaskets that are for the stock manifolds. If you use the header gaskets, they will dry up, and crack off. Instant exhaust leak. I learned the hard way.

And no issue on asking rather than paging thru 80 pages. This thread goes on forever.

Hahaha never even noticed it was 80 pages that has to be a record! !

 

[Dono]

Maybe I need to close this one off and start the next phase with the intercooler. This thread covers M90, engine rebuild, w/m injection....lots of issues as I slowly learn the right way to do stuff.

 

[Dono]

Starting new thread, Intercooler install on 2nd gen with Ford Supercoupe M90

http://www.explorerforum.com/forums/showthread.php?p=3138018&posted=1#post3138018

 

[shaggy101]

hey ok so i got through about 10 pages of this thread and am so lost so i am also soon to be building a 4.0 OHV with the m90 supercharger the motor im going to be useing has had lots of work done to it but is still running stock externals asides from headers also the fuel injectors are stock what kind of parts am i going to be needing to run this thing at 7psi any help would be great

 

[4pointslow]

supercharger

Check out 2000streetrod's pages for some information.
His is a SOHC engine though.
http://www.explorerforum.com/forums/showthread.php?t=387768