WickedWindsor
Well-Known Member
- Joined
- March 8, 2005
- Messages
- 245
- Reaction score
- 6
- City, State
- Ontario, Canada
- Year, Model & Trim Level
- 351 powered, 1991 XLT 4x4
I'm wondering if the spline count on the '96 up 5.0 AWD tranny outpu shaft is the same as '91-'94 with 1354 transfer case.
I currently have an Advance Adapter tailhousing that mates the 1354 to my AOD tranny. It came with a new output shaft to fit inside the 1354. I'm basically hoping that I can get a '96 EX tranny (4R70W) and put my tailhousing adapter on it and bolt up the 1354 and use a Bauman engineering controller.
Can this be done, or am I looking at installing a new output shaft in the 4R70W tranny?
I currently have an Advance Adapter tailhousing that mates the 1354 to my AOD tranny. It came with a new output shaft to fit inside the 1354. I'm basically hoping that I can get a '96 EX tranny (4R70W) and put my tailhousing adapter on it and bolt up the 1354 and use a Bauman engineering controller.
Can this be done, or am I looking at installing a new output shaft in the 4R70W tranny?