jlsparky7
Explorer Addict
- Joined
- April 4, 2009
- Messages
- 1,503
- Reaction score
- 3
- City, State
- Woodhaven, Mi
- Year, Model & Trim Level
- 1996 5.0 XLT AWD
Well I was changing the ball joints and tie rod ends on my girlfriends escort. I ended up putting a small 2-3mm hole in the outer CV boot on the drivers side. Tried patching.... no luck.
How hard it is to replace the boot? I did the tie rod, ball joint, brakes, shocks with no problem. Doesnt the axle just slide out of the trans after I take the inner boot off?
How hard it is to replace the boot? I did the tie rod, ball joint, brakes, shocks with no problem. Doesnt the axle just slide out of the trans after I take the inner boot off?