CV for a 4406 T-Case

[turboexplorer]

I am almost done with everything getting it all ready for the SAS build in March. I really want to run a CV rear shaft but I can't find anywhere or anybody that has or can get a CV style slip yoke for the 28 spline T-Case. I think I remember in doing my research for the 4406 swap that some of the expeditions with the air ride had a CV from the factory?

Anyone know of anything let me know, its about the last thing that I have to figure out!

 

[DominicanX]

You could have your current shaft sent to a driveline shop and have it converted to the CV style.

 

[turboexplorer]

I have called lots of shops including big expensive driveline shops. None have a rear slip yoke designed for a CV. I guess they ate different from the standard slip yoke I currently have.

 

[Stang5lgt]

You are right when I was searching for a Expedition shaft when I had the 4406 in the Merc I found a couple Expeditions with the Double Cardan slip yoke shafts. They are too short so you will have to have it lengthened. But if you want I keep an eye for you if you still need one.

 

[turboexplorer]

That would be great I need th slip yoke CV part. Would love to run a CV rear. Little smoother.

 

[vroomzoomboom]

You are right when I was searching for a Expedition shaft when I had the 4406 in the Merc I found a couple Expeditions with the Double Cardan slip yoke shafts. They are too short so you will have to have it lengthened. But if you want I keep an eye for you if you still need one.

if you find two of them, let me know as well please!!!!

 

[crazyflights]

I had 2 of them. One came from a 98 F150 Reg cab short bed, 4.6, 5spd, 4406 truck. if that helps.

 

[turboexplorer]

I had one built for mine. All new parts. Pics are in my build thread its in the truck.