-
Ford Explorer Community - Maintenance - Modifications - Performance Upgrades - Problem Solving - Off-Road - Street
Explorer Forum Covers the Explorer ST, Explorer Sport, Explorer Sport Trac, Lincoln Aviator,
Mercury Mountaineer, Mazda Navajo, Ford Ranger, Mazda Pickups, and the Ford Aerostar
Register Today It's free!
First Post in our new forum...
- Thread starter Heath
- Start date
Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!.
- Joined
- August 3, 2000
- Messages
- 35,099
- Reaction score
- 12,040
- City, State
- NORTH IDAHO, 7B
- Year, Model & Trim Level
- B2 "Slightly" Modified
- Callsign
- FOURTEN
AWESOME!!!!!!!!!! It seems as allt he Colorado guys took a year off or something....
I know alot of people are having a hrd time finding time and $$$ to continue their projects and to go wheeling, but I know I am more ready than ever!!
Brett Grooms and Joe Deitz should also be out and about this season......
I know alot of people are having a hrd time finding time and $$$ to continue their projects and to go wheeling, but I know I am more ready than ever!!
Brett Grooms and Joe Deitz should also be out and about this season......
socman829
Member
- Joined
- October 28, 2002
- Messages
- 18
- Reaction score
- 0
- City, State
- Littleton, Colorado
- Year, Model & Trim Level
- 1994 xlt 4 door
brett
brett, you might not remember me, i'm the guy who was in longmont with the '94 xlt, i just wanted to know where it was you and joe said to get my alignment done at. everyone else, what's up? Heath, when are you gonna come shoot the **** with me at best buy?
scotty
brett, you might not remember me, i'm the guy who was in longmont with the '94 xlt, i just wanted to know where it was you and joe said to get my alignment done at. everyone else, what's up? Heath, when are you gonna come shoot the **** with me at best buy?
scotty
- Joined
- September 2, 2000
- Messages
- 7,456
- Reaction score
- 25
- City, State
- Rigby, ID
- Year, Model & Trim Level
- 00 Excursion (THE BUS)
Next time I see your truck in the parking lot... I haven't seen it over there lately... Do you drive something else too???
94ZebraRanger
Well-Known Member
- Joined
- September 27, 2002
- Messages
- 261
- Reaction score
- 1
- City, State
- Laramie, WY
- Year, Model & Trim Level
- 95 Explorer XLT
Finally got a forum for our area. home of some of the best wheeling in the world.
Tim
Tim
offroader_69_me
Elite Explorer
- Joined
- October 8, 2000
- Messages
- 1,449
- Reaction score
- 1
- City, State
- Trinidad, Crawlorado
- Year, Model & Trim Level
- '91 XLT
this is too cool!
DarkMan
Elite Idiot Stocker
- Joined
- August 8, 2000
- Messages
- 437
- Reaction score
- 0
- City, State
- DFW, Texas
- Year, Model & Trim Level
- '11 Taco TRD/OR
Originally posted by hvac man
Nice to see there is a place to seek refuge from the TX and east coast guys...lol just kidding
Funny. When I was in Colorado, it seemed like the Colorado Contingent dominated the forums. When I left CO, everybody quit wheeling! Haven't even had a CCR since I left. Shame shame shame. What ever happened to Perry, Matt Adams, Chris Woodly, Marshall, and Wabbit? Matt sold is Ex (to Texas
). Perry's trying to sell his. All the CO guys that go wheeling now, showed up after I left. Heath is the only one left that I know. And Heath is a freak. 
Ah well. At least you guys are keeping the COCon alive.
- Joined
- August 3, 2000
- Messages
- 35,099
- Reaction score
- 12,040
- City, State
- NORTH IDAHO, 7B
- Year, Model & Trim Level
- B2 "Slightly" Modified
- Callsign
- FOURTEN
Okay fella's lets do it.
I am going up to Apex tonight just to flex out my front end and make sure its all dialed in.........(hope)
Hopefully the custom axleshaft islong enough and the slip yoke holds together
Brett uses this alignment shop:
Midwest Frame & Alignment Inc.
303 733 9167
1750 S Acoma St
Denver
Tell them Brett sent ya for sure!
Only guy in town who can align a lifted TTB (even custom ones) with a tape measure, no stupid lazers here....
I have been trying to get Joe Deitz and Brett to go wheeling with me soon! Brett has mentioned "Slaughterhouse". N E 1 know this trail?
Moab is in Oct fella's...
I finally have most of my projects done for this year and all bugs worked out, so lets do some wheeling!!!
I am going up to Apex tonight just to flex out my front end and make sure its all dialed in.........(hope)
Hopefully the custom axleshaft islong enough and the slip yoke holds together
Brett uses this alignment shop:
Midwest Frame & Alignment Inc.
303 733 9167
1750 S Acoma St
Denver
Tell them Brett sent ya for sure!
Only guy in town who can align a lifted TTB (even custom ones) with a tape measure, no stupid lazers here....
I have been trying to get Joe Deitz and Brett to go wheeling with me soon! Brett has mentioned "Slaughterhouse". N E 1 know this trail?
Moab is in Oct fella's...
I finally have most of my projects done for this year and all bugs worked out, so lets do some wheeling!!!
- Joined
- August 3, 2000
- Messages
- 35,099
- Reaction score
- 12,040
- City, State
- NORTH IDAHO, 7B
- Year, Model & Trim Level
- B2 "Slightly" Modified
- Callsign
- FOURTEN
Matt, where is this trail? THNX
Oh and why havent you got a BII yet?
Oh and why havent you got a BII yet?
socman829
Member
- Joined
- October 28, 2002
- Messages
- 18
- Reaction score
- 0
- City, State
- Littleton, Colorado
- Year, Model & Trim Level
- 1994 xlt 4 door
Slaughterhouse
To get to Slaughterhouse, all you do is take 285 west and turn right at the conocco before crow hill, take a left at the intersection, and it's down there. check out 4x4trails.net, and you'll get way better directions then the ones i just gave you.
To get to Slaughterhouse, all you do is take 285 west and turn right at the conocco before crow hill, take a left at the intersection, and it's down there. check out 4x4trails.net, and you'll get way better directions then the ones i just gave you.
DrKlawz
Active Member
- Joined
- June 16, 2003
- Messages
- 57
- Reaction score
- 0
- City, State
- Denver, CO
- Year, Model & Trim Level
- 2000 Ranger XLT
Nice one Heath!
Hey all... I just joined up w/ Adams and company @ the CO Chapter of fordtruckworld.com, and I was hoping somebody'd pull something together w/ this list too.
The money's damn tight, but I need to get out! A buddy of mine is coming out this weekend and it's Desolation Tour 03 -- Colorado Ghost Towns.
Anyway, good to know there's a group to run with. Fortune, if you guys hit Apex later in Aug, I'm up.
l8trs.mb
Hey all... I just joined up w/ Adams and company @ the CO Chapter of fordtruckworld.com, and I was hoping somebody'd pull something together w/ this list too.
The money's damn tight, but I need to get out! A buddy of mine is coming out this weekend and it's Desolation Tour 03 -- Colorado Ghost Towns.
Anyway, good to know there's a group to run with. Fortune, if you guys hit Apex later in Aug, I'm up.
l8trs.mb
Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!.
mattadams
Moderator Emeritus
- Joined
- September 17, 1999
- Messages
- 8,161
- Reaction score
- 10
- City, State
- Longmont, CO
- Year, Model & Trim Level
- 2017 Explorer Sport
410, can't afford a second vehicle right now. If I could I woulda bought that solid axle convertable top explorer that was for sale in denver for $3500 a few months ago, didn't even have that though...
Welcome to the board here klawz.
Welcome to the board here klawz.
Explorer Features
Explorer Features
