Full Interior LED Conversion

[Nixthebomb]

Finally got the rear wiper control & defroster done

(Not a good pic, it's actually a lot greener than the instrument cluster)

Also did cruise control switches

(Again not a good pic, it's actually a lot greener than the instrument cluster)

(Again not a good pic, it's actually a lot greener than the instrument cluster)

My license plate lights

And some in the corner light (pulled from map light, will be replacing)

 

[Nixthebomb]

How'd you do them? Would you possibly wanna do mine for me if I shipped them to you? If so how much man?

May be a little lait, but what were you wanting done?

 

[BrianDye]

My 4x4 switch, and the defroster/fog/rear wiper set...

I actually have a couple laying around, let me know what you would charge man, id really appreciate it!

 

[lycan91]

What did you use for you license plate lights?

 

[storlied]

Nice work. I forgot how the stock gauges look since I replaced mine.. lol

 

[Nixthebomb]

What did you use for you license plate lights?

I also used the 5 SMD LES ones used everywhere else

My 4x4 switch, and the defroster/fog/rear wiper set...

I actually have a couple laying around, let me know what you would charge man, id really appreciate it!

What color did you have in mind? For the defroster /fog/rear wiper set, that's no issue, can be done pretty easily for me now. All I'd charge was price for LED, resistors.

As for the 4x4 switch mines a 2WD so I don't have that one, do have the wiring behind the dash, but not sure if it has power, and again just parts and labor, so around 10-15, plus parts

Now on the on the defroster/fog/rear wiper set It's easier to have the piece that ust bolts on to the bezel with them installed so I can pre-wire them all, any chance you have that piece as well. And I still have some of the resistors I used to do it. SO you're looking at parts+labor+shiiping

 

[lycan91]

Those are very bright. I did my HVAC last night. I love it, it looks so nice. Pretty blue.

 

[Burashnikov]

Bulbs

Finally got the rear wiper control & defroster done

Whitch bulbs you use for (rear wiper control & defroster) ? Can you post a Link... I am from another country so i had bad english.

 

[Nixthebomb]

Just Normal 5mm Green LED, got em off ebay, and resistors for them to operate at 12 volts

 

[RoCkrMAN]

Pics from Iphone looks a little pink but it is indeed red.

HOW DID YOU GET THEM SO BRIGHT!?!?!? I have the 01 Explorer Sport cluster and heater controls in my 97' and they suck at lighting up. At night you can barely see them... Please help

 

[tattooedthomas84]

Did the gauge needles turn red because of the LEDs or or did you Change or paint the face of the needles red because mine are white

 

[tattooedthomas84]

Oh and what size bulb did you use in the rear wiper switch, rear defroster and fog light switch are they 194s was it a t5. I did my cruise buttons those were t5s but I had to use the factory plastic light bulb plastic housing thing. I want to do what you did with those three buttons just don't know the bulb number(s) if you could let me know that would be awesome thank you very much.