Installing Pioneer AVIC Z130BT - Pics, need some advice

[jeepstylexx]

So i started the install today for my Pioneer Avic Z130BT. I installed the rear view camera in the tow hitch and ran wiring thru the spare tire and up, installed the bluetooth mic, as well as the ipod connector in the third cup holder by drilling thru the bottom. Was proud of myself for accomplishing all that, but now I'm stuck with the wiring. I purchased a steering wheel control adpater kit and was told i didn't need a wiring harness for the HU. .. but i have no idea how to hook it up to the existing and don't want to start splicing wires. Any advice would be helpful! Thanks

 

[-Strike-]

Yeah, you're going to want the wiring harness for the head unit to match the factory wiring. Otherwise you will have to cut and splice.

 

[BigRondo]

Like -Strike- said, you're gonna want the harness. Here is a good thread to check out: http://www.explorerforum.com/forums/showthread.php?t=271666

Good luck and be sure to keep us posted!