Jon And Sheri's Vitamin D Wagon

[CDW6212R]

The flexible version should hold fine, the rigid stuff would let go if the body flexed.

 

[GRNMACHINE]

another 33 page thread i somehow missed, darn u Turdle. this is going to take forever to read thru. who am i kiddin, cant wait to read it all. if u need parts powdercoated on this beast, there is a guy here who is really good at it. he has a thread somewhere which is about 58 pages long.... Keep Up the Great Work as usual!!!

 

[corkey]

yeah yeah yeah , rub it in about rust free rockers Eh, ,

 

[RangRayy]

Turdle does powdercoating haha. Does a great job at it too!

 

[james t]

The foam stuff works good as long as its sealed over (thick coat of herculiner will work fine for this). I used it on my rear fenders, shaved it down smooth, then herc'ed over it.

 

[GRNMACHINE]

Turdle does powdercoating haha. Does a great job at it too!

Well then I hope he gets ahold of him!!!!!!!!!

Dont know why but What Can I Powdercoat Today thread is like watching a good show, cant wait for more.

And yeah, you are rubbin in the rust free rockers Jon! Get some salt on 'em

 

[RangRayy]

Turdle started that powdercoating thread lol they are one in same.

Light bulbs going off? Gears turning? Lol just messing

 

[Turdle]

A layer of fiberglass body filler over the holes, some sanding and a coat of herculiner finished up this job just fine.

No pics from us for a while. I threw the garage PC in the trash. Long story

 

[MrQ]

A layer of fiberglass body filler over the holes, some sanding and a coat of herculiner finished up this job just fine.

No pics from us for a while. I threw the garage PC in the trash. Long story

:ttiwwp:

We also demand the story. Or all replies will be just like this one.

 

[Turdle]

Ok, well, it was a fine Saturday. We were supposed to go to Springfield to hang out with Gmanpaint but Sheri started to feel lousy so we hung out for a while. Then she got a wild thing up her socks and decided to vacuum an area rug.
She burned up the belt on the vacuum so we took a drive to Dollar general store. They didn;t have them so we went to walmart.

Mind you we went for a vacuum belt and walked out with a 46" samsung TV and a blueray disc player.

Well, Yesterday I decided the setup was not quite cool enough, so I shut down tha garage computer. I took off the cover, blew out the dust and sat it in it's new home beside the TV stand. I got all the hookups, even found a serial cable --got it all hooked up and when I plugged in the Tower the green power supply indicator started blinking. I disconnected the 20 pin connector from the mother board and the light came up steady. So---I was so pissed from wasting my afternoon I tied it in a knot and threw it in the alley.
After I cooled off a bit I took out the hard drive and tossed it in the trash.

It was a Compaq from like 2005 so no big loss.

 

[james t]

2005? That's newer than anything i own! We have a Tandy for chrissakes!

:

 

[Turdle]

Well shoot
I was going to just change out the isolator pads on the front shocks but snapped a top post on one of them.

Now I cannot seem to find a replacement.

There are numbers on the current ones.
32151 16697

then it says EXPLORER right under that

CO51X3

I tried searching by these numbers and came up with a blank

Could someone cross reference this number for me? I cannot seem to get Ranchos reference to download.

compressed length is 14" ( might be better if it was a little less actually) and extended length is 21"

I need the least expensive as I plan on changing things later so this is no time for investment quality.

 

[Albino 94LTD]

Why not send those dimensions to 'The Shock Guy' EF vendor?????????

Only 7" of travel?

 

[cybergasm]

this from the Explorer Pro Comp catalog

32151X 21.75 13.06 8.69 Stem Loop 2.36

http://www.summitracing.com/parts/EXP-321515/

The X in the part is replaced with the number 5 which is the top stud mount and loop at the bottom

 

[Turdle]

By golly Dave you got it. Thanks!!

 

[Turdle]

Swiping a picture Techieman33 took for another thread.

This shows the rocker panel re work, and herc grill

How do you like it?

 

[CDW6212R]

That's a great picture, and it almost doesn't look like an Explorer.

 

[cybergasm]

waiting for the close ups

 

[Turdle]

waiting for the close ups

That may be a while. Just hold that thought Dave.

 

[SVO42]

That's a great picture, and it almost doesn't look like an Explorer.

You come off sounding like that's a good thing.