Skotty
Active Member
- Joined
- December 27, 2007
- Messages
- 84
- Reaction score
- 0
- City, State
- In the Pasture,Ok
- Year, Model & Trim Level
- 92 XLT
I am replacing my 92 motor with a 95.Got way to good a deal to pass up the motor.After the initial tear down.I noticed that in the rear of the engine it looks to be a mini distributor,Im assuming this is the Cam sensor.On 92 there is not one but a plug looking thing.
Will I be able to swap these two items and is this the thing that every one says you need the special tool to set it at 26 degrees?
Will I be able to swap these two items and is this the thing that every one says you need the special tool to set it at 26 degrees?