Roadie-01
Member
- Joined
- April 23, 2002
- Messages
- 17
- Reaction score
- 1
- City, State
- Covina California
- Year, Model & Trim Level
- 1992 xlt 4x4
Excuse me if this has been asked. I did a search but couldn't find the answer I was looking for.
I have a 92 Explorer XLT with the 4.0 ohv motor. I just rebuilt my engine but before I crank it over, I want to use an Oil Pump Primer. (yes, I did use engine lube during assembly) I have read where others have used an E11 torx bit (ground down) on a 1/4" drive extension but does anyone make the correct tool for this job?
The only Oil Pump Primer (tool) I have found at the local auto parts store was either 1/4 inch or 5/16 inch.
Thanx for your time
I have a 92 Explorer XLT with the 4.0 ohv motor. I just rebuilt my engine but before I crank it over, I want to use an Oil Pump Primer. (yes, I did use engine lube during assembly) I have read where others have used an E11 torx bit (ground down) on a 1/4" drive extension but does anyone make the correct tool for this job?
The only Oil Pump Primer (tool) I have found at the local auto parts store was either 1/4 inch or 5/16 inch.
Thanx for your time