jrgoffin
Well-Known Member
- Joined
- January 3, 2010
- Messages
- 200
- Reaction score
- 46
- City, State
- The midwest
- Year, Model & Trim Level
- '20 Explorer ST
Since I had removed my Radenso Pro-M radar detector from my '14 Sport along with the BlendMount bracket, it's in need of getting transferred over to my '20. Unfortunately, the power mirror does not have it's plug right in the back, instead it is behind the cover that clips in above and behind it. Since I hate cords, I also used a MirrorTap wire (also available from the BlendMount site) to keep it clean and factory looking. The cord transferred from my '14 is 10" long and hopefully will work here, but I'll find out momentarily.
In any case, for anyone interested in doing something similar, I had one of the tech's at my selling dealership print up the wiring diagrams (he was gracious enough to spare a few moments, which was much appreciated). There are two different circuits here, one if you have the Lane-Keep Assist, and the other without. Both harnesses do only have five wires, but one plug is a 16-pin. Fortunately, switched power is Pin #1 on both, which is the Blue/Brown wire (shown as BU/BN on each diagram). Ground is easy to find since it's the Black wire.
Without Lane-Keeping. Circuit diagram:
Connector for above (C9012). Switched power is Pin#1, Ground at Pin#4:
With Lane-Keeping:
Connector for above (C911). Switched power is Pin#1, Ground at Pin#3:
In any case, for anyone interested in doing something similar, I had one of the tech's at my selling dealership print up the wiring diagrams (he was gracious enough to spare a few moments, which was much appreciated). There are two different circuits here, one if you have the Lane-Keep Assist, and the other without. Both harnesses do only have five wires, but one plug is a 16-pin. Fortunately, switched power is Pin #1 on both, which is the Blue/Brown wire (shown as BU/BN on each diagram). Ground is easy to find since it's the Black wire.
Without Lane-Keeping. Circuit diagram:
Connector for above (C9012). Switched power is Pin#1, Ground at Pin#4:
With Lane-Keeping:
Connector for above (C911). Switched power is Pin#1, Ground at Pin#3: