jster91
Member
- Joined
- January 16, 2009
- Messages
- 20
- Reaction score
- 0
- City, State
- Lititz, PA
- Year, Model & Trim Level
- 2004 Explorer XLT Sport
I've replaced my 4.0L in my 2004 Explorer and now I'm hearing a noise from the torque converter area that sounds almost like a exhaust shield rattle. But, it's only noticable around 2200 rpms or so. It goes away at higher rpms and also below 2200. If I put it in neutral and rev the engine to 2200, it won't make any noise, so I'm sure it tranny related. Is it possible that my fluid is low and causing the noise? Or did I not bleed the oil cooler correctly? I filled the torque converter with a quart of ATF before sliding it back on the tranny. Any Ideas would be greatly appreciated!
Jeff
Jeff