Trick Flow a No-Go?

[ViperPliskin]

This is actually for a V8 swap into my '98 Ranger, but my donor is a '99 XLT so I'll post here. As long as I have the engine out and disassembled, of course I need to put on TMH with a 1" intake spacer.

I'm confused about which spacer to use. The Trick Flow spacers only seem to go up to 1995. Summit couldn't guarantee it would fit a '99 and I'm not sure how the external EGR and GT40P heads will affect which kit I use.

Any help would be appreciated.

Thanks.

 

[410Fortune]

You want this one:



It has the round holes, doesnt matter if you are 96-97.5 with GT-40 heads or 97.5-2001 with GT-40p heads, its the same GT-40 lower intake you want the spacer for

mine is a FMS unit, but there are many many aftermarket ones to choose from

For the explorer engine you will need two additional bolts that do not come with the spacer kit

 

[techieman33]

This is the spacer you want, it already has the correct bolts, so you won't need to go track them down.
http://store.summitracing.com/partdetail.asp?part=TFS-51520018&autoview=sku

 

[ViperPliskin]

Many Thanks!

Thanks for the excellent responses. Spacer on order.