ArnoldHorseshack
Member
- Joined
- April 15, 2007
- Messages
- 17
- Reaction score
- 0
- Year, Model & Trim Level
- Explorer '98 XLT
I just removed the factory radio out of my 98 Explorer XLT and I am not sure what kind of wiring harness to get. The connectors in the dash are a 21 pin (rectangular) and a 16 pin (square). The 21 pin appears to have everything run to it. The 16 pin has one (only one) gray wire with a black stripe down it. Is this just a ground?