hudson52
New Member
- Joined
- May 4, 2014
- Messages
- 2
- Reaction score
- 0
- Year, Model & Trim Level
- 1994 Explorer
This past weekend I had the "pleasure" of replacing the coil pack in my 1994 4.0 Aerostar. The only way I could find to remove the old pack out through the tunnel cover opening was to remove the bolt holding the transmission dipstick tube and vacuum line to the manifold so they could be moved over to make room.
Since the location of the bolt is so difficult to reach it slipped from my grasp when trying to bolt the tubes back to the manifold, falling to God-knows-where never to be seen again.
Does anyone know what size this bolt is so I may locate a replacement? I've done quite a bit of searching but to no avail. Thanks.
Since the location of the bolt is so difficult to reach it slipped from my grasp when trying to bolt the tubes back to the manifold, falling to God-knows-where never to be seen again.
Does anyone know what size this bolt is so I may locate a replacement? I've done quite a bit of searching but to no avail. Thanks.