Argos587
Member
- Joined
- June 13, 2020
- Messages
- 41
- Reaction score
- 10
- City, State
- WYLIE
- Year, Model & Trim Level
- 2001 XLT V6
I am trying to remove the upper oil pan on 2001 XLT with 4.0 V6 2WD. I have removed the lower pan, all of the perimeter bolts, the 8 bolts that go into the mains, the 2 transmission bolts in the rear, and oil pump screen. The upper pan is very stubborn and solidly attached to the block. Tried prying and wedging a small screw driver, but it does not loosen. Am I missing anything, do the inserts for the 8 main bolts need to be lowered? This is a daily driver and would like some input and advice before I move forward and cause more damage than needed.
If this is covered in another thread, please let me know and I will take a look.
If this is covered in another thread, please let me know and I will take a look.