explorer

SET SOLD LOCALLY!

I’m thinking of changing my 3.55 gears to 3.73 gears. I’d like to change the gears instead of swapping the whole axle. Is a kit like this all I would need? I’d like to re-gear to run 32’s and 4.10’s aren’t an option for me. Thanks for any input...

:confused2: I noticed that one side of my truck is sitting higher than the other when I went to install front sway bar links. Do I have to re-seat the bracket that the torsion bolt goes through? I know it definitely shouldn’t be crooked.

Looking forward to meeting everyone on the forum and contributing where I can. Has been a huge help so far. Robert

Hi All, I have been utilizing the forum as a resource for years now but haven't posted anything to this point. I first of all want to say how much of a help and a resource this forum has been and I feel like I should at least contribute something to the forum after years of using it! In any...

hi guys, I just got this 16 Explorer, bought it at an auction with a slight frond end collision, no airbags blown or even radiators damaged, or suspension damage, it was basically just pulling the frame and reassembling everything together. I have been using Forscan software and a USB wired...

Hi, this is my first time posting to a car forum, sorry if I sound ignorant about cars or anything. I recently started having issues with my ford explorer, it is a 4.0L V6 4WD 1996 Ford Explorer. It started when I took my car home for the holidays, the transmission was slipping a little bit...

For sale 2016-2019 interceptor utility. Go Rhino push bar , excellent condition no scratches or scuffs. $250 also for sale rear trunk area cage great condition Bolts behind rear seats to existing bolts. $150 also havis rear truck window bars , brand new in box never installed. $120 item...

The oh so fun process of turning my '97 explorer into my 4wd off road rig starts here. Hoping to greet many fellow off roaders through this as well as getting advice in the build

As a friendly introduction, I reside in Indiana not to far from the state capital. I came here with my 97 Explorer hoping to gain some knowledge and insight into fixing it. I’m also a DIYer and like knowing what parts break down so I get the best bang for my buck. (No, not cheap.) I’m not much...

Hi I am getting the below error. Does anyone has any idea what the problem could be? Code: C101A - Vacuum Pressure Sensor Additional Fault Symptom: - Circuit Voltage Out Of Range Status: - Previously Set DTC - Not Present at Time of Request - Malfunction Indicator Lamp is Off for...

Last fall, I was threading the needle over and over and it seemed like the deer were on a suicide mission. Finally, my luck ran out. I added comprehensive to my Insurance policy a day late and a buck short. A trophy buck. Right at the begining of the hunting season, I hit a very beautiful...

Hey everyone, would anyone have any recommendations for decent lift spindles? Can't seem to find any, and I am guessing that they are not made anymore. If anyone has any used ones laying around by chance I would be very interested in buying them off you, will also pay to ship. Thanks

I have a 2006 Eddie Bauer and and hoping to add a few options. I pulled the navigation out of a mountaineer and installed that then got a Aux, Memory seats / switch and heated mirrors /switch. I am wondering if anyone can point me in the right direction to add these options. I mainly want add...

hello guys, my name is Djordan and I always liked explorer, fortunately a little more than a month ago I got my first one, a 1994 xlt automatic, I'm really enjoying it and little by little I am repairing what is not 100%, in this case my doubt, I do the maintenance because I have enough...

2007 4.0 SOHC 4WD. I know this topic has been beaten to death but when I cold-start my truck I have a slight rattle which goes away very quickly (unless its REALLY cold out then it lasts a little longer). When the truck warms up the engine is super quiet and has good power. The only other thing...

Purchased and drove it home 2.5 hours today. Overall really impressed so far. It has 143k miles. Going to have my mechanic look it over sometime soon, but I feel like I've made a good purchase. It needs a good detailing on the inside, but I'm excited about this one.

When I bought my 96 Explorer a few months back, there was an existing issue with the drivers side window. Switch works, motor turns, but makes a "bumping" noise while running and does not stop turning when the window reaches the top. My mechanic was running a diagnostic for an unrelated problem...

Hi guys! I need help. My ground wire is bad on my fuel pump. Im trying to figure out where the ground wire leads to on the fpdm. I know the location of the fpdm i dont know where the ground leads and i cant find anything on it. Thank you in advance!

Hi every one my name is mark and I have a 1994 ford explorer xlt 4x4 I have had it for 6years now and I love it it has a good 4x4 I haven't got stuck yet and its my daily driver the new intake gaskets on it fuel pump four wheel drive shift motor and I'm fixing to put a new heater core in it...

Hi Everyone, I own a 2018 Ford Explorer Platinum 3.5L V6. So far the vehicle has been pretty good going. One issue that bugs me is my wiper blades/arms. They always skip/hop/rattle/judder across the windscreen whenever they are used. I replaced the stock wiper blades with some Bosch Beam Icon™...

Sad to do it but.. For sale is my modified 2000 Ford Explorer XLT 5.0 v8 AWD. I recently moved from West TN to South Texas for work and am unable to bring all 4 vehicles with me + manage selling my house, moving, building a new house, and manage everything else. I've worked on this car on and...

Hello all, just bought a used (163km) 2013 Explorer Limited and got some good tips from some of these threads already. I've never owned a Ford vehicle before so I'm sure I will be using this page a lot.

Hi guys... I just want to share with you all that I successfully installed aftermarket power running boards on my ford explorer 2015 XLT and it's working absolutely fine. Please see the below video to see how it's working. Thanks.

I had posted earlier about lean codes on my '00 Explorer Sport, and fixed it easily by replacing an evap hose. Well, now P0174 (bank 2 lean) is back and I can't figure out why. It appears intermittently and only on this bank. I have done the following: -I smoke tested again, and there's no...