Search results

If you want just remote filter bracket so you can get your own lines and filter. Go to Summitracing.com type PRM-5021 in the search. The backet has the third hole for a temp sender if you want to install a temp gauge kit that you like. And not like those ugle ones that some remote filter kits...

Mcane6 I was on Summitracing site and found that they have what you got from the guy on Ebay for less. $368.75 with free ground shipping from OHIO. The deal is you buy 4 RS9000X shock and get the RS9000X shock controller for free.

Does anyone have pictures of the control unit mounted in their X? If so can you post them.

It will take more time to route the lines into the truck than to install the shocks them selves.

If you have an Advance Auto Parts store around by you they have them. Where did you find it for $377 plus ship?

So Rick do you use the Fatman or go with something else?

Whats the total power that you need? A company call BLITZ has an amp that I think would work for what you need. Its 1 Ohm stable (AKA 1.3) with a very high RMS. Can you say 1200w RMS power at 1.3 Ohms with a max total power of 2400w. Here is a link to the companies specs sheet on it. BLITZ...

My battery terminals connectors are platinum positive and negative Audiopipe for the time being. I'm thinking of changing the terminals to a Stinger Positive HPM Pro Digital Battery Terminal with Blue Voltage Display and the Stinger HPM Pro Negative Battery Terminal. In the range of $70 for the...

Take a look at this company Blitz Audio If you are going to use the speakers you already have look at this amp. BZA4260 It has a 50RMS X 4 at 4 Ohms. If the want a high RMS 4 channel. Check this one out. 4 X 100 RMS at 4 Ohms BZA4190

Hey Dozier when are you getting back and does Tweeter have it in red 0 gauge at that price?

Wire looms are to protect it from heat and if its black, to look factory. It also works to protect the wire from getting cut.

I'm looking at running 3 amps. One for the front doors, one for the rear door, last one for the subs. The front and rear speakers are 360 watts max each. I haven't decided what sub or subs I want yet. The front speakers are going to be powered by a 800 watt max 2 channel amp with 2x130W RMS @ 4...

I've been looking around for what would be a good 1/0 gauge main power wire but there are so many companies that make them out there. Like Stinger, Audiopipe, Sound Quest by Stinger, Moster Cable, etc... I know a high strand count and has to be OFC (Oxygen Free Copper) to work the best. In your...

I work for Advance Auto Parts and I know what a clay bar is. In fact, the clay bar we have is made by Mother's. Take that Auto Zone.

Check to see if one of your local auto store have a chemical that glows for the anti-freeze system to find leaks. You add it to your anti-freeze and let your X run for alittle and just look around. Some types do need a UV light to see it glow but some don't.

Have you checked you fuse panel under the hood? My X 4x4 started the flashing. So making sure it wasn't by chance. I first disconnected the battery for 30 min, but that didn't do it. Well, I had the windows down and was going to put them up but none of the switches worked. I checked the fuses...

The weight can be affected by the number of vents on the side of the rotor. The vents on the side are to help cool the caliper. Also some companies use better grade metals that others. Which in some cases doesn't mean the heavy one is the better of the two. It could mean that they need that much...

I would use the Fel-Pro Gaskets. The gasket head set you are talking about. I don't think it includes the upper intake gaskets. The one that goes between the the lower intake and fuel rail. Also the one between the fuel rail and unpper intake. Now Ford for the most part didn't put gasket between...

S.Matsushige I'm looking at getting them for my 96 X. Do you still have the Splitfire wires in you X? How well of an aftermarket wires are they? Did they make any difference in power from what you could tell?

There are 2 flasher relays. One is behind the kick plate under the steering wheel. Its a bright yellow relay. The other is tucked up under the driver side fender. Just turn on the turn signal and follow the sound.

You may need LED Load Equalizers. Since the LED bulbs you put in use less power than normal bulbs you need to make up for it. Here is a web site that sells them. autolumination.com I would suggest e-mailing Chris, the wesite owner. Tell him what you drive and what happened when you put them in...

Was it the show "TRUCKS" the host is STACY?

I'm in the middle of a big interior myself. I used a Plasti-kote Flexible bumper & trim paint (flat black) to paint the speaker grills. I tried the steps I made up as I went on a panel I purchased on Ebay for $5. I first used a clear primer paint from Meijers. I didn't sand the area at all. Then...

There is a company that makes them for the 95 to 97 Explorers but its $800+? Its cheaper to modify a Ranger kit.

Hartman- Now that its getting warmer here in Indianapolis. What are planning to finish up or start new projects with your truck?

The painted areas look better than the rest of the trucks paint job. Look like some wet sanding is in order.

Do you have a website address for where you got them from?

Are you still going to get rid of your 4X4 after the weather we had last night?

I though this was an American SUV. So why all the metric?

what about Plasmaglow I hear all the time about LiteGlow and StreetGlow but what about PlasmaGlow. Their neon comes with a better warranty, stronger, installation is easier, and the tubes are longer to start out with. I'm not talking about the whole length of the tube but the visable light from...

Silver or Chrome If you want the 3157 in a silver or chrome bulbs goto Meijer's. In the automotive section with all the other auto bulbs. Look for a black hanging package. On the package it says 3057 but they are 3157. I have installed them in my X. You can get red or amber, I think also white...

Its not that hard to change out the headlights. It will only take about an hour to get everything off and back on. I had to replace mine after I totaled my front end and the fenders, bumper, hood. When you go to take the corner lens off. There is a plastic lip on the bottom of each corner len...

Last night I was at Meijer's and I found chrome bulbs there for $3.99 per bulb. The package says it the 3057 but it's really the 3157. I checked the bulb with a 3157 and the contacts match perfectly. The package is all black and is with the other automotive bulbs. There was other size bulbs that...

There is nothing behind the fender panels. The only thing behind them is about a 2 to 6 inch air gap in different areas. Then you get to the panel for the engine bay. I have had both of mine off to replace the panels from a wreck. The panels are really thin and have very little weight to them...

My explorer did come with the fog light valance but I have been looking at switching my current valance to the fog light valance. So that I can add more lights to the front. What I need to know is the size of the holes for the factory fog lights. I don't want to put in factory lights. That is...

How did you do it I'm trying to put a full console in my 96 Explorer. The big bracket has nothing to hold in down in the rear. What did you do to yours?