1999 ford

I have installed a new compressor on my Explorer and the high side fitting ( marked S on the back of the compressor) on the Assembly hose does not fit into the compressor. I have attached a picture and any ideas will be appreciated.

This is my first post on the forum, so please let me know if there is something required prior to me posting in this section. I currently own a 1999 Ford Explorer XLT 4.0L V6 SOHC Vehicle currently has: 137,900 Original KMs I've recently noticed an intermittent noise from my drivers side (LH)...

Hello everyone, this video details the replacement and upgrade of the front sway bar and end links on a 1999 ford explorer with the 4.0 SOHC I hope you all enjoy this video if you have any questions or comments let me know and I'll answer them as soon as I can.

Hi all. I see so many threads with different info regarding the same question. I acquired my father in laws 1999 ford explorer xlt. 80k miles and really nice condition. Wipers and windows periodically go out. 4wd lights blink 6 times every 2 minutes. And abs/brake light is always on. I ordered...

My friend keeps telling me that I need a center console in my 1999 Ford explorer or my heater/ac won't work. I can't find anywhere on the internet if that's true or not so is there any car heads out there that can help me

Hello everyone, this video details the replacement of the rear shocks on a 1999 ford explorer with the 4.0 SOHC I hope you all enjoy this video if you have any questions or comments let me know and I'll answer them as soon as I can.

Hello everyone, this video details the replacement of the front shocks on a 1999 ford explorer with the 4.0 SOHC I hope you all enjoy this video if you have any questions or comments let me know and I'll answer them as soon as I can.

Hello everyone so I'm currently trying to figure out a heating issue in my explorer last winter I replaced the water pump, heater control valve, thermostat, upper and lower radiator hose, bypass hose, aluminum thermostat housing, and I flushed the entire cooling system out with a bottle of...

Hello everyone, this video details the replacement and modification of the PCV valve on a 1999 ford explorer with the 4.0 SOHC I hope you all enjoy this video if you have any questions or comments let me know and I'll answer them as soon as I can.

Hello everyone, this video details the replacement of the Alternator on a 1999 ford explorer with the 4.0 SOHC I hope you all enjoy this video if you have any questions or comments let me know and I'll answer them as soon as I can.

Hello everyone, this video details the replacement of the DPFE sensor on a 1999 ford explorer I hope you all enjoy this video if you have any questions or comments let me know and I'll answer them as soon as I can.

Hello everyone, this video details the replacement of the brake pedal position switch on a 1999 ford explorer I hope you all enjoy this video if you have any questions or comments let me know and I'll answer them as soon as I can. Link to parts used in this video

Hello this isn't a repair video but more or less an update/help finding parts for my X if this isn't allowed in this subforum since it's not a repair video let me know and I'll remove it

Hello everyone, I made a video showing how to change the hood struts on a 1999 ford explorer if yall have any questions or comments leave them below and ill respond asap I used Strongarm 4026 More Information for STRONGARM 4026

Hello guys I just uploaded a new video on the replacement of the IAC valve on my 99 ford explorer Links for everything used in this video Air Filter Idle Air Control Valve Hart Toolkit Robot or human? Idle Air Control Valve Gasket

Hello guys I just posted a new video on the installation of a rear differential vent on my 1999 ford explorer hope you all enjoy if you have any questions, please let me know

Hello guys Thanks for creating this awesome forum and meeting wonderful people here. I am looking to get a 1999 Ford explore or anything similar but I'm really interested in this one, unfortunately this car has salvage title and I am looking to the community to check if there is anything else I...

Hi, so I'm new to this forum and honestly cars and trucks in general. I have a 1999 Ford explorer 4.0 EFI. I got stuck on a large rock one day and I'm not sure if it's related to my issues, but my issues started shortly after that. For one all of my shift solenoids are throwing a code, and i can...

Hello everyone, new video is posted to the channel this video covers the replacement of the Cruise Control Switch which was recalled on these vehicles

Hello i posted a video showing how to replace the brake booster on the 95-01 explorer

I'm doing upper control arms and lower ball joints on my 1999 Ford Explorer and the right camber bolt on the left side seems impossible to get out without bending a fuel line or removing them altogether. From what I can tell the bolt is one piece with the spacer thing so it needs like 2in by 2in...

Replaced blower motor and the resistor and all fuses and relays are new all plugs and prongs are in good shape. I even replaced the EATC with one I know worked and the blower motor still isn't coming on.. plz help

Hi, new member here. Fuel pump went out a few months ago; no money for repairs, certainly not for fuel pump repairs. Though I've never in my life worked on a car, I've been skulking on this site for some time, trying to figure out how to solve my dire transportation problem. Here's what...

So somebody took a screw driver to my ignition cylinder, too steal it i would assume. Anyways i got a new cylinder and set of keys. At this point i learned of the pats system. So i got a copy of the chip code put into a new chipped key that was cut to the new ignition cylinder. And it still will...

I have replaced the brake booster, master cylinder (bench bleed before installation), and the front brake calipers. No leaks evident upon a lengthy inspection. Solid brake pedal when the vehicle is not running. When cranked the pedal goes immediately to the floor. I have bleed the brakes from...

So I have officially finished the 5.0 swap everything works but I’m having issues getting it started the motor ran fine before I pulled it out of the donor car it cranks with no issue but won’t fire up I don’t have any o2 sensors connected too the car could that be the issue? I would think it...

Hi everyone! I just got a 99 Ford Explorer. It has a humming sound. I know it must be the power steering but it hums when it is idling. Not sure what's happening.

how do you relieve the fuel line pressure of a 1999 Ford Explorer

I notice a clunking sound when shifting into reverse and drive, but most notably reverse. It also happens when I let of the gas while in first gear. Both the front and the rear driveshaft have some play in them. Attached is a video I took of shifting into drive and reverse several times. This...

I have a 1999 for explorer. The rear hatch door stopped opening ... It seems like it doesn't unlock maybe but I'm not sure. I tryed to take the panels off on the inside of the truck around the window And door to see if some how I can open it from the inside but I'm kinda stuck at this point ....

It's taken the front driveshaft out and it still makes the noise

Just outside my driveway the hill goes up a slight incline of about 20 degrees or so. I usually stop right outside my driveway with the Explorer pointing uphill, still in drive, foot on brake while I get the mail from our mailbox (this can take a minute or so if I stop to open something). Then...

Ughhh. I know it's old but can't afford anything else right now. My 1999 ford explorer has gone from 1 thing to the next past 3 weeks. Can someone help so at least i know what I'm looking to do? Been ripped off too many times. First, it kept dying and random starting. I replaced the battery and...

Hello. I have a 1999 Ford Explorer XLT with the 4.0 v6 engine. My rig has 243000 miles on it which isn't bad for a 20 year old vehicle. I bought it with 143000. My question is about the engine. It seems that after about every 14000 miles or so the #6 spark plug fouls out. All the rest of...

Hey all, so I’m having idle issues and check engine lights are always on. Anyways I’ve removed all the old o2 sensors to replace them and ran into and issue with the connectors not matching. I only have 3 sensors and can only hook up two of them. Found one just dangling there unhooked and...

i am working on a 1999 explorer sport and i need to replace the braided fuel line. i can't find the procedure to replace the fuel line from the fuel filter forward to the engine. i have a 4.0 sohc engine. any help would be appreciated.

This past week it got extremely cold out and I had wanted to start my car to let it run for a bit. When I went out the car tried to turn over twice and after that my car alarm started. Now my car doesn't crank at all and my car alarm goes off when trying to unlock my doors or start my car. I...

I HAVE A 99 EXPLORER 4.0 THAT JUST DIED AT A STOP LIGHT. THOUGHT IT WAS THE FUEL PUMP THE WAY IT DIED, SO I REPLACED IT BUT IT TURNS OUT I HAVE NO POWER GOING TO MY IGNITION COIL. IVE REPLACED ALL THE FUSES, RELAYS, CRANK SENSOR AND THE PIGTAIL FOR THE SENSOR, IVE CHECKED MY INERTIA SWITCH AS...

Hello, I have a stock 99 Ford Explorer I recently purchased and the Gem fuse was blown. I replaced the 7.5 amp fuse to have the interior lights come on stay on about 30 seconds or so, and then the fuse blew again.. also accompanied by a burnt smell... when i brought it home 2 days ago, it has no...