1/4 mile tips | Page 2 | Ford Explorer Forums

  • Register Today It's free!

1/4 mile tips

96Saleen said:
yup, i have the XP8...come out to Target at Fairmont and Beltway on Saturday night, i will be out there for sure...just got my new Saleen windshield banner in the mail, have to go put it on...


You know Tom and Tiff in the Mark VIII's?

I used to be one of the board members of HSRA.



Jeff - :navajo:
 



Join the Elite Explorers for $20 each year or try it out for $5 a month.

Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





SVO said:
You know Tom and Tiff in the Mark VIII's?

I used to be one of the board members of HSRA.



Jeff - :navajo:


no, do they hang out there on saturday's? there are alot of people that show up to target every week, but i don't always get a chance to walk around and see who shows up. if anyone is coming out this saturday, let me know and i will look for you...
 






#'s?????
 






he is probably there right now...
 






Okay, well I went to the track last night and it started really humid and hot, and then about an hour later it poured, so I got in 1 decent run.
16.45- 1/4 mile :rolleyes: .
I probably could have done a little better but didnt have anytime to test different starts(revs). This time was just floor it at light (no revving). I really need some more power.
 












thats a good time for that temp almost stock. You have a chip? Any other mods than in your sig? What was your 1/8th time?
 






I only have the mods listed. I did order one of Doug's flashers today, but that will be for next time. As for the 1/8th, it took 10.79 seconds at 67.52 mph. On the 1/4, I ended at 83.65 mph. Boomin' how did you install your zex kit? I got Doug to put on a nitrous program and once I get a little more money, the nitrous goes in.
 






in the 1/8th i run 10.2's with just mac intake, 75 mm pro-m, fms headers and 2.5 true duals. (ported intake manifold, deleted EGR and 1'' spacer but they really didn't add much I dont think)

For the nitrous its easy. A + and a - then a TPS wire. Connect the hoses and cap off the FPR in/outputs on the module

As soon as i get money for a chip, rockers, springs and cam I'll be in the mid 13's in the 1/4.
 






Boomin'- PM'ed about Nitrous.
 






What cam are you going to choose boomin? Are you gonna go with the 1.6 rockers?
 






Comp cams Exteme Energy 266 and 1.6 rollers
 






Featured Content

Back
Top