Mac4975
New Member
- Joined
- September 11, 2018
- Messages
- 3
- Reaction score
- 0
- City, State
- Bergen, NJ
- Year, Model & Trim Level
- 07 Ford Explorer 4.0 V6
Hi all new here and looking for some help with my current issue with my engine swap.
I swapped my engine (07 explorer eddie bauer 4x4, 4.0) with a 05 XLT Explorer 4x4, 4.0. Both engines have the 8th Letter E.
Everything went smooth with engine removal and installation.
When trying to start it initially it turns over the first time, after that it cranks but will not start and over fuels the engine.
Checked all connections and everything seems to be connected and tight.
I am getting spark and have solid compression.
I used the wiring harness from the 07 and all sensors and such look like for like.
I still have the blown engine from the 07 and the 05's wiring harness and trans with wiring.
Any insight or suggestions would be greatly appreciated. Would love to try and get this thing running this weekend.
I swapped my engine (07 explorer eddie bauer 4x4, 4.0) with a 05 XLT Explorer 4x4, 4.0. Both engines have the 8th Letter E.
Everything went smooth with engine removal and installation.
When trying to start it initially it turns over the first time, after that it cranks but will not start and over fuels the engine.
Checked all connections and everything seems to be connected and tight.
I am getting spark and have solid compression.
I used the wiring harness from the 07 and all sensors and such look like for like.
I still have the blown engine from the 07 and the 05's wiring harness and trans with wiring.
Any insight or suggestions would be greatly appreciated. Would love to try and get this thing running this weekend.